![background image](http://html.mh-extra.com/html/valor/755cfk/755cfk_installation-and-operation-manual_851408001.webp)
1
This kit must be installed or serviced by
a qualified installer, service agency or
the gas supplier. These instructions are
to be used in conjunction with the main
installation instructions for the above
listed models.
GROUNDING:
This power supply must
be installed and grounded in accordance
with local codes, or in the absence of local
codes, with the current Canadian Electrical
Code CSA C22.1. or in the USA the National
Electrical Code ANSI/NFPA70 latest edition.
Description of System
The models listed above have been designed to
accommodate the installation of an air circulation fan.
Operated by a variable speed control and a thermally
actuated switch, the fan is designed to boost the natural
convection through the heater; this may be a desirable
feature dependent on the fireplace location and room
layout.
The circulating fan may be installed before the heater
installation or as a retrofit at a later date provided
power is available at the fan location.
Operation
The fan is designed for automatic operation using a
thermal switch. It will take approximately 10-15 minutes
for the appliance to warm up and allow the switch to
activate the fan.
To operate the fan, rotate the speed control knob
clockwise from OFF to HIGH. Further rotation will control
the fan speed, once the automatic thermal switch has
been activated.
4000506-08
If the fire is turned off, the fan will continue to operate
until the thermal switch cools, unless the speed control
is manually turned to the OFF position. A switched
power supply to the fan, with the switch conveniently
located on the wall may be desirable.
Should electrical power fail, the heater operation will
remain unaffected.
Electrical Requirements
The fan kit requires a power supply of
120 Volts,
1 phase, 60 Hz. Full load current is less than 1 amp.
© 2021, Miles Industries Ltd.
INSTALLER: Leave this manual with the
appliance.
CONSUMER: Retain this manual for future
reference.
755CFK Circulating Fan Kit
Use with
Valor Portrait 534, 650 and 739 ONLY (Incompatible with 738)
INSTALLATION AND OPERATION MANUAL
755CFK
WARNING
If the information in these instructions
is not followed exactly, a fire or
explosion may result causing property
damage, personal injury or loss of life.
NOTE
When the heater is operated at lower settings,
the fan may cycle off and on repeatedly as
the thermal switch temperature cannot be
maintained due to the operation of the fan.