![background image](http://html.mh-extra.com/html/valor/1550lsbv2/1550lsbv2_installation-instructions-manual_851457001.webp)
1
4005356-03
Linear 3-1/2” Surround Kit 1550LSBV2
Approved for use with Valor models 1500 and 1600 ONLY
INSTALLATION INSTRUCTIONS
L1 Series
HOT GLASS
WILL
CAUSE BURNS.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW CHILDREN
TO TOUCH GLASS.
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and must be
installed for the protection of children and other at-risk
individuals.
Note: This kit must be
installed or serviced by a
qualified installer, service
agency or gas supplier. These
instructions are to be used
in conjunction with the main
installation instructions
for the above listed heater
model.
INSTALLER: Leave this
manual with the appliance.
CONSUMER: Retain this
manual for future reference.
© Copyright Miles Industries Ltd., 2020.
The 1550v2 Linear 3-1/2” Surround Kit is designed to be
used on the Linear L1 1500 and Linear L1 2-sided 1600
Valor heaters.
The application of this kit does not affect the venting
capabilities or method of preparation of the heater as
described in the heater installation manual.
This trim fits flat against the cement board with the ability
to tuck additional non-combustible materials up to 1/2”
thickness behind the trim.
Replacing the side panels on the trim allow non-
combustible material thickness to be increased to 1”.
Overview
(Fireplace engines sold separately)
Trim size
Non-
combustible
cement board
Barrier screen
LH Trim panel
RH Trim panel
LH Side door
RH Side
door
Trim
Plinth
21
-1
/4
” (
54
0 m
m
)
46-3/16” (1173 mm)
Thickness 1-3/8” (35 mm)