background image

 

 

VSP-V-1038 

 

 

Issue 8

 

 

947038

 

 

 
 
 

 

V-1038 

 

PAGING HORN/AMPLIFIER ASSEMBLY 

 

30 WATT -48VDC WITH VOLUME CONTROL

 

 

INTRODUCTION

 

This instruction provides identification, installation 
and technical assistance information for the V-1038 
Horn/Amplifier Assembly. 
 
This paging unit has received a FCC type KX 
registration and is designed to be used with FCC 
registered key telephone systems.  In accordance with 
FCC rules with applicable tariffs, this Paging Unit may 
only be installed with the authorization of the host 
system.  Installations may be made by Valcom, Inc., 
an authorized agent of the same, equipment 
manufacturers, telephone companies, registered 
telephone refurbishers and those qualified for 
installation of FCC registered systems under FCC 
Rules Section 68.215.  The FCC Registration Number, 
BAF9I7-69358-KX-N, will be listed in the affidavits 
filed with the Telephone Company; it will also be 
recorded in the system log kept by installation and 
maintenance personnel. 

 

DESCRIPTION

 

The V-1038 Paging Horn/Amplifier Assembly is a 
self-contained 30 Watt paging system incorporating: 

(a)  30 Watt amplifier 
(b)  Volume control 
(c)  High efficiency horn 

 

Dimensions/Weight 

• 

7.38" H x 10.00" W x 10.40" D 

 

(18.75cm H x 25.40cm W x 26.42cm D) 

• 

4.1 lbs. (1.86kg) 

 

Nominal Specifications

Input impedance: 

600 Ohms minimum 

Input level: 

10dBm nominal 

Current at -48VDC: 

1 Amp  

 

Connections:

 

Green 

     Tip 

 

Audio Source 

Red 

     Ring    

Audio Source 

White 

     -48VDC 

Power 

Black 

     Ground 

Power 

 

 

 
Due to the low-level signal required, distribution 
wiring is normally accomplished through house cable 
pair or station wire. 
 

Typical applications include:

 

(a) 

Use with a Valcom page control. 

(b) 

Expanding the capability of telephone 
system’s which contain limited paging 
capabilities. 

(c) 

Loud ringer application in systems  where 
loud speaker tone signaling is employed. 

 

INSTALLATION

 

This horn may be used for either interior or exterior 
paging applications and should be installed 16 to 40 
feet from the floor taking into account installation and 
maintenance access. 
 
Connect s tation wire (or other suitable pairs) to the 
proper speaker connection.  When using station wire, 
limit the maximum run to 250 feet.  Two horns may be 
connected to the same pairs if the total run is less 
than 125 feet. 
 
When a remote power unit is used, the audio pair run 
should be limited to 5000 feet and a maximum of 6 
horns. 

 
 

Reviews: