OEM TM-50 Quick Start Guide
D291720.5c
Page
1
of
6
Rev.
3,
10/17/17
This quick start guide provides basic setup and operating instructions for the OEM TM-50. The intended use of the OEM TM-50
Taping Machine is to produce taped reels of individually sealed and consistently orientated components. Use of this equipment
in any other way is not recommended.
Work Area:
The OEM TM-50 is designed to be operated in a temperature-controlled, light industrial setting.
The machine
should be mounted on a flat, dry, stable surface in a well-lit area. Choose a mounting area that is at least 72” x 30” to provide
sufficient space for the assembled machine.
See pages 2-4 for Quick Start instructions.
Front View
1.
Cover Tape Arm 4. Payout Arm
2.
Take-up Spindle 5. Tape Guides
3.
Take-up Arm 6. Controller
Back View
7.
Cable & Power Connections
8.
Air Regulator
Physical Specifications:
Height:
18 inches (46 cm),
Width:
42 inches (107 cm),
Depth:
18 inches (46 cm),
Weight:
105 lbs. (48 kg)
Power Required:
115/230 VAC, 50-60 Hz; 1.1 Amp, 120 Volts; .6 AMP, 220 Volts
Operating Environment:
Operating Temperature: 0°C - 50°C (32°F - 122°F), Maximum Humidity:
90% non-condensing
Only qualified personnel with the proper technical training, experience working on this type of equipment
and awareness of the possible hazards should perform maintenance on the OEM TM-50.
The user is protected from moving parts and exposure to objects being ejected under pressure by a metal
enclosure. The OEM TM-50 should never be operated with the enclosure removed. There are no internal
parts that can be serviced by the user.
Always disconnect the machine from air and power supplies, placing the unplugged cables in clear view
before performing any maintenance tasks.
Detailed User’s Guides which include maintenance instructions, spare parts lists and troubleshooting information are available
on the V-TEK, Inc. website:
www.vtekusa.com
.
Contact Information
V-TEK, Inc.
751 Summit Ave
Mankato, MN 56001
TEL:
(507) 387-2039
website:
http://www.vtekusa.com
email:
5
2
3
1
4
6
7
8
