![background image](http://html.mh-extra.com/html/utc-fire-and-security/interlogix-truvision-tvd-dome-hr/interlogix-truvision-tvd-dome-hr_installation-sheet_1064937001.webp)
1 of 2
P/N 1069136B • REV 2.00 • ISS 04MAY11
Description
The TruVision TVD-DOME-HR camera is a high-resolution
dome camera that that can be used in retail, commercial, and
residential environments. The camera uses a varifocal lens
and offers custom configurability.
Safety precautions
Read this installation sheet in its entirety before using the
camera.
To avoid dangerous electrical shock or damage to the
equipment, do not try to disassemble the camera or any of its
components.
Do not attempt to service this camera by yourself unless you
are authorized to do so. Opening the cover may expose you to
dangerous electrical shock or other hazards. Only a service
technician should perform this procedure.
Never point the camera at the sun and do not expose the lens
directly to the sun or strong light as this may damage the
camera.
Handle the camera with care. The camera contains sensitive
components, avoid any shock or impact to the camera.
Improper handling can damage the camera.
The camera is designed for indoor use. Do not use the camera
when the temperature is lower than
−
10
C (14°F) or higher
than +50
C (122°F). For safe camera usage, the maximum
humidity should not exceed 85%. If the camera is placed in an
extremely dusty location, special housing may be needed to
protect the camera and lens.
Installation
Before installing the TruVision TVD-DOME-HR camera, make
sure that the location is mechanically sound, protects the
camera, and affords the required views. Once the camera is
securely mounted, follow the procedure below to connect the
camera. For power and video connections see Figure 1 below.
For camera dimensions see Figure 2 and Figure 3 on page 2.
Figure 1: TruVision Dome camera power and video connections
To install the camera:
1. Fasten the camera to a wall or ceiling (or another solid
surface). The camera must be stable when connected.
2. Connect the 75
Ω
coaxial cable to the video output.
3. Connect the power cable to the camera.
4. Adjust the camera position and angle as required.
Camera dimensions
Figure 2: TruVision Dome dimensions - base attachment
TruVision TVD-DOME-HR Camera
Installation Sheet