INSTRUCTION MANUAL
For safety purpose you should read this instruction manual carefully before using the appliance
for the first time and save this instruction manual for future reference.
The appliance is designed for domestic use and may only be operated in accordance with this
instruction manual.
Always Handle with care and warn other users the potential hazards.
DO’S
1.
Please use correct voltage: 220-240 V, 50 Hz AC. Please only connect the appliance to an
earthed wall socket.
2.
Unwind and straighten the power cord and Steam hose before use.
3.
The appliance must be used and rested on a stable surface.
4.
When placing the appliance on its stand, ensure that the surface on which the stand is
placed is stable.
5.
Power cord & Steam hose should not touch the soleplate.
6.
The plug of the power cord must be removed from the socket-outlet before filling the water
in the tank.
7.
Keep the electrical appliances out of reach from Children or infirm persons. Do not let them
to use the appliances without the supervision.
8.
If the appliance is damaged, it must be repaired by the manufacturer or its service agent or
qualified person in order to avoid a hazard.
9.
Empty the water tank after use.
10. This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way
and understand the hazards involved.
11. Keep the appliance out of reach from children less than 8 years of age while it is IN USE or
cooling down.
DO NOT’S
1.
Do not allow children to touch the appliance when ironing.
2.
Do not allow children to play with the appliance.
3.
Do not leave the appliance unattended when it is connected with a mains supply outlet.
4.
Do not use an extension power cord set unless competent authority has approved it.
5.
Do not add perfume, vinegar or other chemical liquids into the water tank.
6.
Do not immerse the appliance into water or any other liquid.
7.
Do not use the appliance when it is dropped, have visible sign of damage, performs
abnormally or it is leaking.
8.
Do not touch the rest surface of base unit during or just after ironing. It is HOT!
9.
Do not roll the power cord or steam hose around the iron unit or base for storage until it has
cooled down completely.
10. Do not attempt to open the cabinet or dismantle any parts from the appliance, there is no
serviceable part inside.
11. The filling aperture must not be opened during use. Instructions for the safe refilling of the
water tank is given separately in manual.
12. Do not allow children to perform cleaning and user maintenance when they are without
supervision.
13. Do not touch the surfaces shown in Figure 2 and Figure 3 below, during or just after ironing.
They are HOT!
STEAM STATION
Model: Techne Pro 5000
SAFETY AUTO SHUT-OFF FUNCTION
The safety auto shut-off function will operate automatically when the iron
is left immobile or the function button/steam trigger not being pressed for
10 minutes.
1. The Auto Shut off Indicator will be flashing as shown in (Figure 3) to
indicate the appliance is under safety auto shut off function.
2. To reactivate the iron, simply move it. The pilot light will light up to
indicate that the iron is heating up, and it will go off when the iron is ready for use.
Note: The appliance is not switched off completely when it is in safety auto shut off function. Long press
the function button and unplug the appliance to switch it off. The iron may take about 60 seconds to
reach its previous soleplate temperature
ANTI-SCALE CARTRIDGE
This appliance has an anti-scale cartridge to prolong its lifespan.
Normally, the cartridge can last for around 30L of water usage.
1.
When the Anti-scale Cartridge Indicator lights up (Figure 4),
it indicates the anti-scale cartridge needs to be changed. It is very
important for you to change the cartridge before continue to do ironing.
2.
Immerse a new anti-scale cartridge into water for 5 minutes (Figure 5) before first use for better
performance.
3.
Press to release the cartridge from the appliance and pull out the old cartridge from the
appliance (Figure 6).
4.
Insert the new anti-scale cartridge (Figure 7).
Note: If the anti-scale cartridge is not installed or installed improperly, the appliance will not be able
to use and the Anti-scale Cartridge Indicator will be flashing (Figure 8).
SELF-CLEANING INDICATOR
This function removes the scales and minerals built up in the Steam Chamber. The appliance will
remain in the best condition if this function is performed at least once a month or more regularly
depending on the hardness of water used.
1.
When the self-clean indicator lights up, it indicates that the appliance needs to undergo
self-cleaning (Figure 9).
2.
Fill the water tank to the max level (See “FILLING THE WATER TANK”)
and plug in the appliance.
3.
Press the function button follow with the steam trigger and hold
both buttons for 3 seconds. The appliance will then enter the
self-cleaning mode.
4.
Press the function key to proceed self-cleaning. Press the steam
trigger to resume ironing. (Note: when self-cleaning is confirmed to
proceed, it will not be able to terminate until the self-cleaning
process is completed.)
5.
Hold the iron about 15 centimeters above the sink in the ironing
position. Loose material will come out through the steam holes of
the iron together with water (Figure 10). The appliance will resume to the previous ironing
setting when complete.
6.
Ironing with a damped cloth to remove any deposits on the sole-plate. Remove any water
stains that may have formed on the soleplate.
7.
Long press the function button and unplug the appliance to switch it off.
USING YOUR APPLIANCE
1.
This appliance is designed to use normal tap water. Other liquid might damage the appliance.
2.
Connect the appliance with a suitable mains supply outlet.
3.
Start ironing after the icons on the display panel stop flashing which indicates the required
temperature is reached and ready to use.
4.
Always disconnect the appliance from the main after use.
BEFORE THE FIRST TIME USE
1.
Remove any protective films or stickers on the appliance.
2.
Unwind and straighten the power cord.
Note: When using the Steam Station for the first time, do not use it on your laundry. Some
residue may remain inside the appliance. Begin the first time ironing with an old towel. Press
the steam trigger to ensure the residues are completely released.
HINT FOR IRONING
1.
Sort out the articles to be ironed according to the type of fabric. This will minimize the
frequency of temperature adjustment for different garment.
2.
Test ironing a small area on the backside or inside the garment if you are unsure about the
type of fabric. Start with a low temperature and increase gradually.
3.
Wait for 2 minutes before ironing the heat sensitive fabrics. Temperature adjustment needs
certain time to reach the required level, no matter it is higher or lower.
4.
Delicate fabrics such as silk, wool, velour, etc. are best ironed with an ironing cloth to prevent
shine marks.
FILLING THE WATER TANK
1.
Disconnect the power cord from electric outlet.
2.
Pull out the water tank (Figure 11).
3.
Open the Water Inlet Cover and fill the water into the water tank until the max level on the
water tank (Figure 12).
4.
Insert back the water tank in its place & click fix it properly before start using the appliance
(Figure 13).
CARRY LOCK
The appliance is equipped with carry lock. You can carry the
appliance with one hand by the handle of the iron unit when
the iron is lock on the base (Figure 14). To release the iron unit
from the base, turn the carry lock to unlock position (Figure 15).
AUTO STEAM FUNCTION
The appliance is equipped with Auto Steam Function. The function will generate sufficient amount
of steam for different temperature settings to achieve the optimal combination of temperature and
steam for ironing.
TO DO IRONING
1. Press the function button to turn on the appliance and
select your desired temperature to do ironing.
2. Depending on which temperature setting that you have
selected, the corresponding temperature symbol will be
flashing on display to indicate that the iron is heating up. When
the iron is ready for use, the temperature symbol stop flashing
and lights up continuously.
3. Steam ironing is available for all temperature setting except
“Dot1”. You can hold the steam trigger to generate steam for
steam ironing. The respective steam indicator for “P-temp”,
“Dot 2”, “Dot 3” and “Max” will flash indicates it is generating
steam. Release the steam trigger to stop generating steam.
4. You can adjust the temperature setting of the appliance by
pressing the function button. The corresponding temperature
symbol will be flashing until the iron is ready for use.
5. After use, long press the function button for 2 seconds to turn
off the appliance.
6. After every use, follow the instructions in “Draining the water”.
It is recommended to drain the water inside iron after use.
CLEANING AND MAINTENANCE
1.
Disconnect the power cord from the mains supply outlet.
2.
Use a damped cloth or non-scratching cleaner to remove the deposits on the
soleplate or the cabinets.
3.
Never use sharp or rough objects to remove the deposit on the soleplate.
4.
Never use any abrasive, vinegar or descaling agents to clean the iron.
STORING THE APPLIANCE
1.
Make sure the water is already drained out from the water tank.
2.
Place the iron unit on the base.
3.
Turn the carry lock to the lock position.
4.
You can carry the appliance with one hand by the handle of the iron unit when the iron is lock
on the base.
TROUBLE-SHOOTING
If your steam generator does not work well, check the following points:
VERTICAL STEAMING
You can also remove wrinkles on delicate garments in hanging position,
hanging curtains, or other hanging fabrics:
1.
Select your desired temperature setting with steam ironing available.
2.
Hold the iron in vertical position 15 to 30 centimeters
away from the garment (Figure 16).
3.
Press the steam trigger.
Warning: Do not apply steam on any clothes or fabrics that are being
worn by human or pets. Temperature of steam is very high.
DRAINING THE WATER
Disconnect the iron from the mains supply outlet.
1.
Pull out the water tank (Figure 17).
2.
Open the Water Inlet Cover and drain water inside the water tank (Figure 18).
3.
Insert back the water tank in its place (Figure 19).
