1
INSTRUCTION MANUAL
For USAlert Alpha 4 Hand Programming
Before Programming
The USAlert Alpha 4 pager can be programmed using Cap Code Programming
(CCP) software and a special programming cradle (UB-29). Key options of the
Alpha 4 can also be programmed manually without the need for software and
equipment. In the case of manual programming, 8 cap codes, baud rate, and
RF frequency can be programmed by hand. The option for hand programming
must be enabled in the CCP software (Hand Program/Canned MSG tab, Hand
programming: Enable box checked) for this feature to be operational.
Password protection for hand programming is optional and also is set in the
CCP software (Hand Program/Canned MSG tab, Hand programming: Require
password box checked or not checked).
