© UPLIFT Desk
• 800-349-3839 • [email protected] • upliftdesk.com
Step 3
Mark the center of each hole with a pencil, and place the Hous-
ing to the side.
If you own a drill, you can make pilot holes to make installation
easier. Use it with a 1/8” diameter drill bit and, ensuring that you
DRILL NO DEEPER THAN 1/2”, drill pilot holes where you’ve
made your pencil marks.
Step 1
Slide the Drawer out from its Housing.
Step 2
Determine the placement of the drawer before mounting it by
holding the Housing under your desk, just about flush with the
front edge of the desktop.
Note:
Some thicker UPLIFT desktops are built with metal support
bars embedded in the bottom side for support. They are clearly
visible when looking under the desk. Be mindful of where your
drawer will be going. When choosing its placement, do not place
the holes directly over the support bars. If you must place it near
a support bar, straddle the holes on the Housing on either side of
the support bar. (see fig 1)
(fig 1)
Housing
Drawer
Stop bar
Package Contents
®
Bamboo Desk Drawer
SKU: STR018
Short wood screw
(qty 3)
Long wood screw
(qty 4)
Step 4
Install the Housing to your desk using the four Long wood
screws.
