STEP2
Press the [COMPONENT] button (TV,
VCR, DVD or AUX) to be programmed
and [OK/SEL] button simultaneously for
3 seconds. The Component LED light
will turn on for 30 seconds indicating
the unit is ready to be programmed.
STEP3
Point the remote control toward the
Component and enter the 3-digit code
number assigned to your brand.
*Note :
If the 3-digit code number you just
entered is correct, the Component will
turn Off. If it did not turn Off, continue
entering code numbers listed for that
brand until the Component turns Off.
STEP4
After you’ve entered the correct code
number and the Component has turned
Off, press the [POWER] button to turn
the Component back On. Now it is time
to test the VOLUME and MUTE buttons
for the TV (or PLAY and STOP buttons
for VCR and DVD) to make sure they all
work. If any of the functions do not
work as they should, repeat from STEP
3 using the next 3-digit code number
listed for that brand until you find the
best Component code.
STEP5
Once you have found the correct 3-digit
code, save it by pressing the same
[COMPONENT] button one more time.
The Component LED light will blink
twice to confirm that the code was
successfully stored.
Now, program the rest of your Components by
repeating STEPS 1-5.
*Note :
If the Pre-Programmed Method did not
work, or if the Code Tables do not list
your Component brand, use the Auto-
Search Method as explained in Section B.
B. Auto-Search Method
STEP1
Turn on the Component you want to
program (TV, VCR, DVD or AUX).
STEP2
Press the [COMPONENT] button (TV,
VCR, DVD or AUX) to be programmed
and [OK/SEL] button simultaneously for
3 seconds. The Component LED light
will turn on for 30 seconds indicating
the unit is ready to be programmed.
STEP3
Point the remote toward the Component
and press the [CH
] or [CH
] button
one step at a time or keep it pressed.
The remote will emit a series of ON/OFF
commands. Release the [CH
] or
[CH
] button as soon as the Component
turns Off.
STEP4
Test functions. (Same as for 3-Digit
Code Programming Method - Section
A). If any of the functions do not work as
they should, repeat from STEP 3 using
[CH
] or [CH
] buttons to find the
correct code.
STEP5
Save the code. (Same as for 3-Digit
Code Programming Method - Section A).
Now, repeat the Auto-Search Method for
those Components you could not program
earlier with the Pre-Programmed Method.
C. Finding a Component Button’s Setup
Code Number
If you used the Auto-Search Method to
program a Component, you may not know
what the correct code number is. Here is a
way for you to identify the code number, so
you can record it for future reference.
STEP1
Press the [COMPONENT] button (TV,
VCR, DVD or AUX) you want to verify
and the [OK/SEL] button simultaneously
for 3 seconds. The Component LED light
will turn on for 30 seconds.
STEP2
Press the [INFO] button and count the
number of times the Component LED
light blinks. This number indicates
the first digit of the code, followed by
the second and third, each separated
by a one second pause when the LED
will turn off.
*Note :
10 blinks represents the number zero.
Example :
One blink, (pause), eight blinks,
(pause) and three blinks, indicates
code number 183.
D. AUX Function: Programming a 5
th
Component
You can take advantage of the AUX function to
program a 5
th
Component such as a second
TV, VCR, DVD or Audio Component.
STEP1
Turn on the 5
th
Component you want
to program (TV, VCR, DVD or Audio).
STEP2
Press the [AUX] button and the
[OK/SEL] button simultaneously for 3
seconds.The [AUX] Component LED
will turn on for 30 seconds.
STEP3
Press the [COMPONENT] button you
want to setup. Point the remote control
toward the Component and enter the 3-
digit code number assigned to your
brand.
STEP1
Press the [TV] button and the
[OK/SEL] button simultaneously for 3
seconds. The [TV] Component LED
will turn on for 30 seconds.
STEP2
Press the [VOL
] button.
STEP3
Press the [TV] button again.
The Component LED will blink twice
to confirm the programming.
To return to original state:
If you wish to restore the CABLE channel
control in TV mode, repeat the above steps but
press [CBL] in
STEP3
.
G. Programming Volume Control
Volume and Mute control are factory-
programmed to automatically transfer to the
respective Component mode you select, as
follows:
CBL
: CBL
T V
: TV
VCR
: TV
DVD
: TV
AUX
: AUX
However, you can program the volume controls
(Volume Up, Volume Down and Mute) from one
Component to operate in another Component.
If you wish to store the TV volume control in
CBL mode, use the following steps.
STEP1
Press the [CBL] button and the
[OK/SEL] button simultaneously for 3
seconds. The [CBL] Component LED
will turn on for 30 seconds.
STEP2
Press the [VOL
] button.
STEP3
Press the [TV] button.
The Component LED will blink twice
to confirm the programming.
To return to original state:
If you wish to restore the CBL volume control
in CBL mode, repeat the above steps but press
[CBL] in
STEP3
.
H. Programming a ‘Macro’ button.
If your remote model has custom-programmable
Macro buttons available, they can be
programmed to act as a 'Macro' or Favorite
Channel button in CABLE mode. This allows you
to program up to five 2-digit channels, four 3-digit
channels or three 4-digit channels that can be
accessed with one button press.
STEP1
Press the [CBL] button to select the CBL
mode.
STEP2
Press the [MACRO] button and [OK/SEL]
button simultaneously for 3 seconds.
The [CBL] button will turn on for 30
seconds.
STEP3
Enter the the 2, 3 or 4-digit code for the
channel you want programmed first (for
example, 007) using the Number Pad,
then press the [STOP] button. Then
enter the code for the next channel (for
example, 050), then press the [STOP]
button. Repeat this process for the third
channel. The [CBL] button will blink
once for each channel entered.
STEP4
Press the [CH
] button to store the
channels that were selected. The [CBL]
button will blink twice to confirm the
storage of commands.
To access the programmed channels, press
the [MACRO] button once. This will bring up
the first channel. Press once again and it will
bring up the second channel. Press again and
it will bring up the third channel.
I. Low Battery Warning
When the batteries are low and need to be
replaced with fresh batteries, the Component
LED lights will blink 2 times in sequence
whenever a [POWER] button is pressed to turn
on equipment.
J. Memory Lock System
This remote control is designed to retain
programmed memory for 10 years even after
batteries are removed from the remote control.
K. Record Your Component Set-up Codes
TV
Set-up Code Number:
VCR
Set-up Code Number:
DVD Set-up Code Number:
AUX Set-up Code Number:
*Note :
If the 3-digit code number you just
entered is the correct number, the
Component will turn Off. If it did
not turn Off, continue entering
code numbers listed for that brand
until the Component turns Off.
STEP4
Test functions. (Same as for 3-Digit
Code Programming Method - Section
A). If any of the functions do not work
as they should, you need to find a
new code.
STEP5
Once you have found the correct 3-
digit code, save it by pressing the
[AUX] button one more time. The
Component LED light will blink twice
to confirm the code was stored. Now
when you press the AUX button, all
the buttons will work with that 5
th
Component.
E. Programming the System On/Off Button
This allows you to program the System On/Off
button so it can send up to five power On/Off
commands with one button press.
STEP1
Press the [CBL] button.
STEP2
Press the [SYSTEM ON/OFF] button
and the [OK/SEL] button simultaneously
for 3 seconds. The [CBL] button will turn
on for 30 seconds.
STEP3
Press the first [COMPONENT] button
you want to store in the [SYSTEM
ON/OFF] button and then the
[POWER] button. Repeat this for
other Components until you have
stored all the desired power
commands into the [SYSTEM
ON/OFF] button.
STEP4
Press the [CH
] button to save the
power commands you stored. The
[CBL] button will blink twice to
confirm the commands have been
saved.
F. Programming Channel Control
You can program the channel controls
(Channel Up, Channel Down, Last and
Numbers) from one Component to operate in
another Component mode. Default channel
control settings on the remote control are as
follows:
CBL
: CBL
T V
: CBL
VCR
: CBL
DVD
: DVD
AUX
: AUX
If you wish to store the TV channel control in
TV mode, use the following steps.
Button Functions
4
Programming the Remote Control
5
SYSTEM ON/OFF
Designed to send Power On/Off
commands for up to five Components
with one button press.
Refer to section
E
for details.
POWER
Allows you to turn your TV, VCR, DVD, AUX
and Cable Box On and Off.
AUX, DVD, VCR, TV, STB
Used to select the component you want
to operate and signals remote control activity.
INFO
Displays information about the program
currently playing or highlighted in the program guide.
EXIT
Exit from current screen.
PAGE
Accesses pages above or below the
information currently displayed.
CURSOR NAVIGATION PAD
Navigate to and highlight an item from
the on-screen choices.
A, B, C, D
Make direct selections from on-screen menus.
CHANNEL
Selects the next higher or lower channel.
LAST
Returns to the previously tuned channel.
Displays the IPTV interactive.
FWD
INTERACTIVE
FWD ahead in stored or recorded.
VCR/DVD/VOD KEYS
NUMBER PAD
Enter numbers to tune to channels.
Also, make numeric entries on on-screen menus.
Perform standard VCR and DVD functions
when in VCR and DVD mode, and Video-On-Demand
functions when in CABLE mode.
ASPECT/#
Changes the HD screen viewing aspect
ratio through the Cable STB.
PIP CH +/-
Selects the next higher or lower channel
in the PIP (Picture-In-Picture) window
through the Cable STB.
MOVE
Moves the PIP (picture-In-Picture) window to
another location on the screen through the
Cable STB.
LIGHT BUTTON
Press to backlight all keypad buttons.
Press again to turn off (or simply wait 10 seconds
for automatic shut-off).
NOTE: You can also use the CH or the program
guide as alternate ways to tune to channels.
MENU
Displays the Applications Menu.
GUIDE
Displays the program guide listings.
OK/SELECT
Selects highlighted screen options.
SETTINGS
Displays settings menu.
MUTE
Silences the audio. Press to activate.
Press again to restore sound to the
previous level.
VOLUME
Raises or lowers the sound level.
FAV
Displays favorite channels.
ON DEMAND
Provides direct access to On Demand channel.
BACK
Takes you to the screen you visited previously.
M BUTTONS
IPTV company custom-programmable Macros.
Refer to Section H for programming steps.
RECORD TV
Record a program on your TV
ON-OFF
Opens or closes the PIP (Picture-In-Picture)
window through the Cable STB.
VIDEO SOURCE
Selects the video source from available
video Components through the Cable STB.
SWAP
Swaps the contents of the PIP (Picture-In-Picture) window
and the main viewing screen through the Cable STB so that
the PIP window displays on the main screen.
Reserved for future use.
Replays the previous few seconds of a program.
There are two ways you can program your
CLIKR
TM
-5
remote:
* The Pre-Programmed 3-Digit Code Method
* The Auto-Search Method
The Pre-Programmed Code Method allows you to setup all the buttons at once by entering 3-digit
code numbers that correspond to a particular Component’s manufacturer/brand, so it’s the fastest
and easiest of the two methods. (Code Tables are on the backside of this Instruction Sheet.) The
Auto-Search Method scans through all the codes in the remote control, one at a time.
IMPORTANT SETUP NOTE!
This pertains to all programming steps. When you are in setup mode, a component LED will
light for 30 seconds.If you do not press a button within 30 seconds, the LED light will turn off
and exit setup mode and you will need to start over.
A. Pre-Programmed 3-Digit Code Method
STEP1
Turn on the Component you want to program (TV, VCR, DVD or AUX).
Universal Remote Control, Inc.
www.universalremote.com
OCE-0060G REV 01 (06/30/08)
UR5U-8700L-IP
Operating Instructions For
CLIKR
™
-5
Cable Remote Control
The
CLIKR
TM
-5
UR5U-8700L-IP are
designed to operate the Scientific-Atlanta,
Pioneer, Pace Micro, Samsung and
Motorola digital set tops, plus the majority
of TV, VCR, DVD and AUDIO equipment on
the market as shown below.
CABLE
: Cable Converters
TV
: Televisions
VCR
: VCRs and TV/VCRs
DVD
: DVD Players
AUX
: Audio Receivers and DVRs, etc.
Introduction
1
DEFAULT STATE:
Component Default:
CABLE Set Top Box (STB)
Channel Default:
CABLE channel and numbers
through the CABLE STB. You have the option of
controlling your CABLE channel and numbers
through the TV or VCR. Refer to section
F
for
programming steps.
Volume Default:
Volume and Mute control are
automatically transferred to the respective
Component mode you select, as follows: CBL:
Cable Set Top Box / TV: TV / AUX: AUX. Volume
and Mute control for VCR and DVD are
automatically transferred to the TV. However,
you have the option of controlling CABLE
Volume and Mute through the TV, VCR or AUX.
Refer to section
G
for programming steps.
Operations
3
Replacing Batteries
2
Before you program or operate the remote
control, you must install two new AA alkaline
batteries.
STEP1
Remove the battery compartment cover
on the back of your remote control.
STEP2
Check battery polarity carefully, and
install the batteries as shown in the
illustration below.
STEP3
Replace the battery compartment cover.
Manufacturer/Brand
Set-Up Code Number
CBL-CABLE Converters
Set-up Code Tables
6
SCIENTIFIC ATLANTA 001 003 041 042 045 046
PIONEER
001 103 034 051 063 076 105
PACE MICRO
001 005
SAMSUNG
001 030
MOTOROLA
002 111 148
GENERAL INSTRUMENT 005 103 104
HAMLIN
049 050 055
HITACHI
103 055
JERROLD
005 004 103 005 003 008 009 010 069
MAGNAVOX
010 012
MEMOREX
052
MOXI
111 252
PANASONIC
044 047
PHILIPS
006 012 013 020 085
PULSAR
052
RCA
047
REGAL
049 050
REGENCY
057
SONY
108
SPRUCER
047
TOCOM
039 040 056
TOSHIBA
052
VIEWSTAR
012 015
ZENITH
052 060 093 100
ADB
254 255
AMINO
249
AT&T
251
MYRIO
254 255
MOTOROLA
253
WEGENER
250
A MARK 112 143
ABEX
025
ACCURIAN
036
ADMIRAL 072 251 333
ADVENT
247 388
ADVENTURA
002
AIKO
103
AKAI
116 146 248 404 405 473 475 323 387 391
ALBATRON
017
ALERON
028
AMERICA ACTION
043
AMPRO 073
AMSTRAD 052
ANAM 043 054 056 080 112
AOC
116 363 112 058
APEX DIGITAL
006
ASTAR
477
AUDIOVOX
076 454 388
AVENTURA
052
AVION
441
AXION
039
BELCOR
116
BELL&HOWELL
333 072
BENQ
423
BOXLIGHT
266
BRADFORD
043
BROCKWOOD
116
BROKSONIC
238
BYDESIGN
031 032
CANDLE 116 002 003 363
CAPEHART 058
CARY AUDIO DESIGN 266
CELEBRITY
001
CENTURION
116
CETRONIC 043
CHANGHONG
247
CITIZEN 116 002 003 363 043 258 103 143
CLARION
043
CLASSIC 043
CLP CLASSIC
333
COLORTYME
116
CONCERTO 363
CONCIERGE
073
CONTEC 043 050 051
CORNEA
116
CORONADO 143
CRAIG 043 054
CROSLEY
164
CROWN 043 143
CURTIS MATHES
116 258 363 143
CXC
043
CYBERHOME
015
DAEWOO 363 016 043 044 076 103 114 125 127 143
DAYTRON 363 143
DELL
320 164 363
DIMENSIA
333
DREAMVISION
235
DUKANE
011 025
DUMONT
116 073
DURABRAND
096 052
DWIN 257
DYNASTY 043
DYNEX
400
EIKI
187
ELECTROBAND
001
ELECTROGRAPH
466
ELECTROHOME
143 024 076 196
ELEKTRA
072
ELEMENT
363 494 526
EMERSON 028 048 043 155 005 116 363 047 050 051
076 096 143 153 154 052 514
ENVISION
116
EPSON
324
ESA
323
FISHER 007 057
FUJITSU
246 198 410
FUNAI 028 043 052
FUTURETECH 043
GATEWAY
242 268
GE
073 116 008 009 034 056 074 155 333 363
GEM
391
GIBRALTER
116 073
GO VIDEO
026
GOLDSTAR 113 116 102 363 106 112 127 143
GRUNPY
028 043
HAIER
363 501
HALL MARK 363
HANNSPREE
349 381
HARLEY DAVIDSON 028
HARVARD
043
HAVERMY
081
HELLO KITTY
076
HIMITSU
043
HISENSE
419 442
HITACHI 011 166 009 010 012 023 075 143 158 072
363 250
HP
378 316 327 421
HUMAX
518
HYUNDAI
337 338
ILO
472
INFINITY
164
INFOCUS
333 230 547 548 470
INITIAL
035 282
INSIGNIA
350 400 052 164 403 454 457
INTEQ
073
JANEIL
002
JBL
164
JCB
001
JCPENNEY 024 116 008 009 030 065 258 143 333 363
JENSEN 013
JVC
038 034 001 083 199 210
KAWASHO
116 001
KEC
043
KENWOOD 116 001
KLEGG
466
KLOSS 002 059
KMC
143
KNOLL SYSTEMS
230
KONKA
457
KREISEN
530
KTV
043 116 143 154
KURAZAI
072
LG
363 113 116 102 106 112 127 143
LITEON
268
LODGENET 072
LOEWE
164
LOGIK 072
LUXMAN 363
LXI
166 007 138 052 251 333 164
MAGNAVOX
164 059 116 003 060 061 363
127 022 333 094 226 390 467 431
MAJESTIC
333 072
MARANTZ 116 164 281
MATSUI 164
MATSUSHITA
080
MAXENT
242
MEGATRON
116 011
MEMOREX 007 072 363
MGA 116 363 024 028 042
MIDLAND
333 073
MINTEK
362
MINUTZ
008
MISAKAI
052
MITSUBISHI 124 109 024 028 040 042 146 363 348
MONIVISION
017
MONTGOMERY WARD 333 072
MOTOROLA
081
MTC
116 363 258
MULTITECH
043
NAD
138 025
NEC
272 197134 116 040 016 024 056 019 262
236 281
NET TV
242
NIKEI
043
NIKKO
116
NIKO
527
NORCENT
390
NORWOOD MICRO 027
NTC
103
NUVISION
351
OLEVIA
432 363 333
ONKING 043
Manufacturer/Brand
Set-Up Code Number
TV
Manufacturer/Brand
Set-Up Code Number
CBL-IPTV
Manufacturer/Brand
Set-Up Code Number
TV
Manufacturer/Brand
Set-Up Code Number
TV
