MS926
Wireless 2D Pocket Scanner
Quick Start Guide
Version 1.0
401320G
Charging
Plug the USB cable into the port on the scanner and into a USB port
on the host computer.
Host
USB
Micro USB
Scanner
Test & Finish
Open a word processing program such as
Microsoft Word or Notepad and scan the
following barcode:
If the word “unitech” appears on the
screen you have succesfully installed
your scanner.
MS926 TIPS
●
The MS926 should be recognized as a
generic HID device by your host device,
similar to a standard keyboard. This
allows you to scan into any field you could
normally type into.
• If the MS926 is out of wireless range from
the host device, it will automatically save
any scan data in its buffer memory and
automatically upload the scan data to the
host when back in wireless range.
•
The MS926 can also operate in Batch
Mode, where a wireless connection is not
required. In Batch Mode, the MS926
saves all scan data in the internal memory
and then uploads the data when
connected to a host.
Scanner Type
Operation Mode
BT HID *
BT SPP
USB SPP
BT SPP (Slave)
Wedge
Batch
Auto *
MS926 Pairing
*
：
Default Option
For additional configuration options, please visit www.ute.com to download the user manual and the
scanner configuration manager utility.
●
NFC Pairing with Mobile Devices (BT HID Mode)
Step 1. Ensure your mobile device supports NFC and that it is enabled.
Step 2. MS926 will automatically enter BT pairing mode. (For firmware version
older than 2.4, please hold Page Down key and Scan button
simultaneously to enter BT pairing mode.)
Step 3. Turn both NFC & Bluetooth
®
on your mobile device.
Step 4. Touch the back of the MS926 scanner to your mobile phone, until the
device prompts to accept pairing.
Step 5. Press ok to respond your Bluetooth
®
pairing request.
Step 6. MS926 is now connected to your mobile phone.
●
Pairing with Mobile Devices (w/o NFC)
Step 1. Go to your host device settings and turn the Bluetooth
®
function on.
Step 2. MS926 will automatically enter BT pairing mode. (For firmware version
older than 2.4, please hold Page Down key and Scan button
simultaneously to enter BT pairing mode.)
Step 3. The MS926 will appear on your device as “MS926-XXXXXX.”
Step 4. Select “MS926-XXXXXX.”
Step 5. If you have Bluetooth
®
2.1 or higher,“MS926-XXXXXX” will now appear as
paired. Proceed to “Test & Finish.”
Step 6. If you are prompted to enter a pincode, please enter the number “2926”
to finish pairing.
●
Pairing with PC / Notebook (BT HID Mode)
Step 1. Open “Devices and Printers” by clicking the Start button and then,
on the Start menu, clicking Devices and Printers.
Step 2. MS926 will automatically enter BT pairing mode. (For firmware version
older than 2.4, please hold Page Down key and Scan button
simultaneously to enter BT pairing mode.)
Step 3. Click “Add a device,” and then follow the instructions.
Step 4. Click the Bluetooth
®
enabled device (MS926-[XXXXXX]) you want to add
to your computer, and then click Next. If you don't see the device you want
to add, make sure the device is turned on and discoverable. If you just
turned on the device, it may take Windows several seconds to detect it.
