background image

Edition 10.9.20 | 

Product design and technical data may be subject to change

Edition 10.9.20 | 

Product design and technical data may be subject to change

Sagging/Hanging

Cutting outside 

designated area

Twisted

Installed without 

aluminium channel

+

-

Class III

24V DC

Glide XL GS35U

Glide XL GR45

Refer to data sheet

for compatibility

Surface Mounted

Recessed

Power

5 ~ 30 Watts

unios.com

Page 

1/4

Eclipse G2 Glide XL

unios.com

Page 

4/4

IP20 Strip

ECM0

XXXX

IP67 Strip

ECM7

XXXX

Glide XL GS35

-GS35

XX.XX

Glide XL GS35U

-GS35U

XX.XX

Glide XL GR45

-GR45

XX.XX

Base 

Codes

LINEAR SERIES

Material

Aluminium

IP Rating

20 | 67

For comprehensive protection of a luminaire against electrical surges, surge protection shall be installed 

on the mains supply where required to protect luminaires and drivers from transient voltage damage.

CAUTION

 

– This product must be installed by a qualified installer

Please read instruction manual carefully before installing luminaire

Surge Protection

For warranty information visit unios.com/warranty

Please read these installation instructions carefully before installing this product. This product must be installed and 

maintained by a suitably qualified person/s in compliance with the latest applicable regulations and relevant legislation. 
Unios does not warrant any claim based on defects or damage caused by misuse, improper installation, improper 

operation and/or modifications carried out by the purchaser or third parties. This product shall not be used as a 

'working light' during construction. This will result in the warranty of the product to be void. For warranty duration, 

please refer to the data sheet.

IMPORTANT: 

Refer to ESD Protection Section 

located on page 1 before mounting strip.

35

102.6

43.4

80

26.9

65

35

22

35

Install Person/s

1-2  

Cutting Guide

Model:

 IP20, IP67

(

ECM0

XXXX.FPXX, 

ECM7

XXXX.FPXX)

Model:

 RGB, RGBW, Tunable White

(ECM0XXXX.FP

RG

, ECM0XXXX.FP

RW, 

ECM0XXXX.FP

TW

)

25mm

50mm

RGBW

+

W

B

R

G

RGB

+

B

R

G

Standard

+

-

Tunable 

White

+

WW

CW

Parts

2x Mounting Clips 

(per metre)

2x End Caps 

(per metre) 

Mounting Plate w/ 2x 

Screws (per metre)

Glide XL GS35

Avoid pressing LED 

too hard and/or sliding 

fingers across strip.

Additional Accessories

Invisimount 

Suspension Kit

Midnight 

Diffuser

Linear Canopy

Suspension Kit

Strip Mounting

Recommended cleaning products:

 

Wax and grease remover, methylated 

spirits, isopropyl alcohol or 

surface cleaners.

1

2

3

Aluminium Channel

Eclipse G2

Disposal

Ensure correct disposal of this 

product (waste electrical and 

electronic equipment).

Ambient Conditions

Recommended to install in an 

ambient temperature <35°C.

Corrosion Protection

It is important to note that care must be taken 

during installation or maintenance to ensure that 

the surface of the luminaire is not damaged. Any 

damage, which is exposed to moisture will result 

in corrosion occurring. 

Please also note that any chemical applications on 

the luminaire or chemical contact via installation will 

cause corrosion of the surface of the luminaire and will 

void the warranty.

For humid and dusty environments, Eclipse IP20 Strip Light must be used with a 

suitable extrusion or the use of Eclipse IP67 Strip Light is recommended.

ESD Protection

When Handling this product, care must be taken so that the LED strip is not 

damaged. Damage due to inappropriate handling is not covered by warranty. 
The following precautions must be taken:
• Ensure device is switched off and disconnected from power supply.
• During assembly/disassembly, care must be taken during handling of LED strip.
• Always ensure to discharge yourself of all charge by touching a grounded bare metal 

surface or approved anti-static mat before working on device.

CAUTION

 

Contains parts and 

assemblies susceptible to 

damage by electrostatic 

discharge (ESD)

Reviews: