INSTALLATION MANUAL
E-905A LED Warning Lights
For more information, visit our website at: www.unibondlighting.com
Switch #1
ST307
(OFF-ON-Momentary ON)
Jumper Wires
From Battery Positive
Ground
Power
Pattern Selection
Battery Ground
Red
Yello
w
Blac
k
Universal Bracket
L Bracket (
Front
)
L Bracket (
Rear
)
mounting brackets
Last Updated: 09/22/2022
Wiring Information
Flash Patterns
Pattern Selection
Suggested Switch Connection
(switches sold separately)
Wire Colour
Function
Red
Black
Yellow
Power
Ground
Pattern Selection
Connect To
+12/24 VDC (Power)
- (Ground)
+12/24 VDC (Power)
Surface Mount: 2 Holes @ 5
1
/
2
” centres
Light should be fused with 5 Amp Fuse (
ATM05 sold separately
)
For 12V to 24V DC Applications
Tap yellow wire (Pattern Selection) to Power momentarily to change patterns. (see
Flash Patterns
)
To return to pattern NO. 1, touch the yellow wire to Power quickly 3 times.
NOTE: This unit may not be factory-set to Flash Pattern NO. 1
NO.
Flash Patterns
SAE
1
2
3
4
5
6
7
8
Double Flash (2Hz)
Single Flash (2Hz)
Triple Flash (2Hz)
Quad Flash (2Hz)
Random
Steady Light
Single Flash
Mega Flash
Class 1, CA13
NO.
Flash Patterns
SAE
9
10
11
12
13
14
15
16
Double Flash
Triple Flash
Quad Flash
Quint Flash
Ultra Flash
Single / Quad Flash
Single / High Intensity Flash
Single / Triple / Quad Flash
Class 1
Class 1
Class 1
Class 1
Class 1
Mounting Options
(brackets included)
For Synchronizing 2+ Lights
(
refer to Synchronization Manual
)
