Light should be fused with 5 Amp Fuse (
ATM05 sold separately
)
Wire Colour
Function
Connect To
Red
Violet
Black
Blue
Yellow
White
Activate Colour #1 (Amber)
Activate Colour #2 (Blue)
Ground
Pattern Selection
Synchronization
Dimming
+12/24 VDC (Power)
+12/24 VDC (Power)
- Ground
+12/24 VDC (Power)
Synchronization Wire from other E-72 Unit
+12/24 VDC (Power)
1.0
Pattern Selection
- Less than 1 second for the pattern change
- Hold for 5 seconds for the
DEFAULT
pattern (#1)
Briefly Connect Pattern Selection Wire (Blue wire) to Power Wires:
1.1
Flash Patterns
#1 - Rotational @ 60 RPM (
DEFAULT
)
#2 - Random
#3 - Single Flash [
SAE
]
#4 - Quad Flash [
SAE
]
2.0
Synchronizing
Do not connect synchronization wires together until all E-72 lamps have been separately set to
the same pattern. Once all lamps are set to the same pattern, connect all synchronization wires
together.
NOTE: Disassembling lamp or cutting the wires voids the warranty
INST
ALLA
TION MANU
AL
E-7211AB
Wiring Information
Switch #
Lamp Function
Switch 1
Switch 2
Switch 1 & 2
Switch 3
Switch 4
Colour 1
Colour 2
Dual Colour Mode
Pattern Selection
Dimming Function (optional)
3.0
Suggested Switch Connection
(switches sold separately)
Operation:
Switch #1
ST100
(ON/OFF)
Switch #2
ST100
(ON/OFF)
Switch #3
ST108
(OFF-Momentary ON)
Switch #4
ST100
(ON/OFF)
Jumper Wires
From Battery Positive
Ground
Colour 1
Colour 2
Pattern Selection
Dimming Function
Synchronization
Battery Ground
Connect to all lamps
NOTE: If dimming function is not
required, this connection
can be skipped
Re
d
Violet
Blue
White
Yellow
Blac
k
