Should be used as part of an employee training program as
required by OSHA and is intended to meet the manufacturers
instructions as required by ANSI Z359.14-2014 CLASS B (SLE).
ANCHORAGE:
The anchorage to which this product is attached
must be capable of sustaining a static load in the direction
applied by the personal fall arrest system of at least 3600 Ibs.
with certification of a qualified person, or 5000 Ibs. without
certification. When more than one personal fall arrest system
is attached to the same structure, the strength requirements
stated above must be multiplied by the number of personal
arrest systems attached to the structure.
PLAN:
Your personal fall protection system before installing
and using this equipment. Consider all factors affecting your
safety during use of this equipment.
CAUTION: BEWARE OF PENDULUM SWINGS TO AVOID STRIKING AN
OBJECT OR CONTACT WITH A LOWER LEVEL, FAILURE TO FOLLOW
INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.
FREE FALL:
Ensure adequate clearance exists in your fall path
to prevent striking an object. When the safety retractable is
anchored above, a minimum of 4 ft. from the working level to
the lower level or nearest obstruction is recommended, if
anchored at foot level an additional 9 ft. clearance is needed.
Working load up to 300 lbs ANSI or 400 lbs OSHA. If worker is
over 300 lbs add 12” to safety factor to avoid lower level
contact. Avoid working where your lifeline may cross or tangle
with that of another worker. Do not allow the lifeline to pass
under your arms or between your feet. Never clip, knot, or
otherwise prevent the lifeline from retracting.
WARNING!
This product is part of a personal fall arrest system. The user must
read and follow the manufacturers instructions for each
component of the system. These instructions must be provided to
the user of this product. The user must read and understand these
instructions before using this product. Manufacturers instructions
must be followed for proper use and maintenance of this product.
Alteration or misuse of this product, or failure to follow
instructions may result in serious injury or death.
WIDEST SHARP LEADING EDGE APPROVED PRODUCT LINE IN THE INDUSTRY!
Approved for
SHARP LEADING EDGE
and foot level drops.
3rd party certified by an ISO 17025 accredited test
laboratory. Lengths up to 110’.
313RL1S
USER INSTRUCTION MANUAL
DESCRIPTION:
SAFETY RETRACTABLE LANYARDS MADE WITH WIRE
ROPE / WEBBING. ALSO AVAILABLE 100% TIE-OFF
MODEL:
M2-HPSY8Y, M2-HPSY8YCA, M2-HPSY8YABB, M2-HPSY8YCT,
US-HN8, MM-HNY8Y, MM-HNY8YCAS, US-HPS8, US-HPS11, US-HPS20,
US-HPS30, US-HPS40, US-HN10, US-HN15, US-HN20, US-HN30,
US-HN40, US-HN60, US-HN80, US-H110, US-H150, US-H210
MEETS OSHA & ANSI Z359.14 CLASS B (SLE)
1-800-850-5914
PHOENIX, AZ USA
WATCH VIDEOS
1, 2, 8, 17, 26, 27, 28, 29 & 31
ON ULTRASAFEUSA.COM
FOR EXTRA
COMFORT
PROUDLY
MANUFACTURED IN
RELIABILITY YOU
CAN COUNT ON!
GERMANY
