www.ucview.com
1-818-772-8255
18425 Napa St. Northridge, CA 91325
SignEdge Player Installation Manual
Thank you for purchasing the UCView SignEdge Player. Please match the items on the list
below with the items in the box. If any item is missing or damaged, please contact your UCView
Media Networks sales representative immediately.
One (1) SignEdge player
One (1) Power supply
One (1) Cable cord
One (1) Antenna
Installing your SignEdge Player:
1) Remove packaging - make sure box and plastic casings are stored away in case a
return is necessary.
2) Plug-in the
LAN/Ethernet
cable into the SignEdge player.
3) Plug-in your video source,
HDMI
or
VGA
cable, into the SignEdge player and the
monitor.
4) Plug-in the
Power
cable into the SignEdge player.
LAN/Ethernet
HDMI
VGA
Power
Note:
* A DVI to HDMI converter will enable you to plug in a DVI screen.
HDMI
(High-Definition Multimedia Interface): A single cable which is
capable of transmitting high-definition video and high-resolution audio.
DVI
(Digital Video Interface):
A cable which is capable of providing digital video signal.
VGA
(Video Graphics Array): An analog cable which enables connection from your
computer to a monitor.
LAN/Ethernet:
A LAN/Ethernet cable can connect to devices over a local area
network, such as PCs and routers.
Wi-Fi:
Our player allows you to connect using Wi-Fi, see number 17.
