www.ucview.com
1-818-772-8255
18425 Napa St. Northridge, CA 91325
RackMedia Xtreme Installation Manual
Thank you for purchasing the UCView RackMedia Xtreme player. Please match the items on
the list below with the items in the box. If any item is missing or damaged, please contact your
UCView Media Networks sales representative immediately.
One (1) RackMedia Xtreme player
One (1) Power supply
One (1) Cable cord
One (1) or two (2) antenna(s)
Note: RackMedia Xtreme player will arrive with one (1) or two (2) antenna(s), depending on the
model.
Installing your RackMedia Xtreme Player:
1) Remove packaging - make sure box and plastic casings are stored away in case a
return is necessary.
2) Plug in the
LAN/Ethernet
cable into the RackMedia Xtreme player.
3) Plug in your video source,
HDMI
or
DVI
cable, into the RackMedia Xtreme player and
the monitor.
4) Plug in the
Power
cable into the RackMedia Xtreme player.
LAN/Ethernet
HDMI
DVI
Power
Note:
* A DVI to VGA converter will enable you to plug in a VGA screen.
* A DVI to HDMI converter will enable you to plug in more HDMI screens.
HDMI
(High-Definition Multimedia Interface): A single cable which is capable of
transmitting high-definition video and high-resolution audio.
DVI
(Digital Video Interface):
A cable which is capable of providing digital video signal.
VGA
(Video Graphics Array): An analog cable which enables connection from your
computer to a monitor.
LAN/Ethernet:
A LAN/Ethernet cable can connect to devices over a local area
network, such as PCs and routers.
