background image

PAGE 1 OF 6 

1018 IH-7357

π

  H-7357

RESCUE

®

 

JUMP STARTER

1-800-295-5510

uline.com

SPECIFICATIONS AND FEATURES

SAFETY

#

DESCRIPTION

1

LCD Display

2

Power Switch

3

Override Button

4

Engine Start Button

5

Battery Charger/Maintainer Button 

6

Safety/Work Light Button

7

Test Function Button

8

USB Output

9

Charge Input

10

Light

11

Jumpstart Clamps

12

AC Charging Adapter Cord 15V, 1A

13

USB to Micro USB Cord

14

DC Charging Adapter Cord 12V, 1A

FEATURES

WARNING! Risk of explosion or fire. 

•  Failure to follow these instruction may result in 

personal injury, destruction of the jump starter, or 

damage to your vehicle. 

•  Read these instructions before use.

•   Wear safety goggles whenever working around 

vehicle batteries.

•  Wear gloves and protective clothing. 

The H-7357 Rescue

®

 Jump Starter is capable of delivering 

significant current to start cars, light trucks, ATVs, boats, 

lawn and garden equipment and other 12V equipment. 

Units feature a 5V USB. Unit also features a safety/work 

light that can be set to continuous on or flashing mode. 

LCD display screen provides indication of reserve power 

level and shows when unit is charged or fully charged. 

Each LCD display will also prompt an error protection 

code if the unit is incorrectly connected, short circuited, 

overheated, overloaded or if no battery charge is found. 

Unit includes rugged hard plastic storage case for 

safe transportation, 12V power socket, integrated jump 

cables/clamps and 12V adapter cable. 

8

1

9

2

3

4 5

6 7

8

1

9

2

3

4 5

6 7

10

11

10

11

12

12

14

14

13

13

ITEM

DESCRIPTION

Internal Battery

Lithium Ion Phosphate (LiFePO4)

USB Output 2 x Ports

5VDC, up to 2.4A maximum

Peak Current/Start Current

1600A peak/800A cranking

Battery Charger/Maintainer

14.4V @ 1A

Safety/Work Light

4W White Flashing/White Work Light

AC Input Charge Port

15V @ 1A

DC Input Charge Port

12V @ 1A

SPECIFICATIONS

Summary of Contents for RESCUE H-7357







Reviews: