![background image](http://html1.mh-extra.com/html/u-line/h-8704/h-8704_assembly-instructions-manual_3179196001.webp)
PAGE 1 OF 6
0721 IH-8704
H-8704
ALUMINUM BENCH
WITH BACK
1-800-295-5510
uline.com
TOOLS NEEDED
Socket Wrench
Power Drill
Rubber Mallet
PARTS
ASSEMBLY INSTRUCTIONS
1. Lay aluminum planks upside down on a flat surface.
Slide end caps onto each end of planks. The
pre-drilled holes of end cap should be facing up.
Use power drill and two self-tapping screws to secure
each end cap onto each end of planks.
(See Figure 1)
2. Rotate seat plank onto side. Place one leg frame at a
time on side 6" from end of seat plank. (See Figure 2)
Aluminum Plank x 2
End Cap for Plank x 4
Hold Down Clip x 16
5/16" x 1½"
Carriage Bolt x 16
3/16" Self-Tapping Screw x 8
5/16" Flange Nut
x 16
Galvanized Leg Frame x 2
Plastic
Round Cap x 8
Figure 1
Figure 2
Two Person Assembly
Recommended
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.