TYAN Tigercub 100 S1894 User Manual Download

Page: 1 / 85

Tyan S1894

Tigercub 100

Motherboard Users Manual

Revision 1.10

manual may be reproduced or translated without prior written consent from Tyan

Computer Corp.

All registered and unregistered trademarks and company names contained in this

manual are propery of their respective companies including, but not limited to the

following.

Award BIOS is a trademark of Award Software Incorporated.

Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

INTEL, Pentium II, Celeron are trademarks of Intel Corporation.

S1894 Tigercub 100 Micro-ATX is a trademark of TYAN Computer Corporation.

Information contained in this publication has been carefully checked for accuracy and

reliability. In no event will Tyan Computer be held liable for any direct or indirect,

incidental or consequential damage, loss of use, loss of data, or other malady resulting

from errors or inaccuracies of information contained in this manual. The information

contained in this document is subject to change without notice.

PRINTED IN USA.

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for Tigercub 100 S1894






















































































Search results

Summary of Contents for Tigercub 100 S1894

Reviews:

Related manuals for Tigercub 100 S1894

Brands by name

Popular brands

TYAN Tigercub 100 S1894, User Manual

Search results

Summary of Contents for Tigercub 100 S1894

Reviews:

Related manuals for Tigercub 100 S1894

Brands by name

Popular brands