Tonneau Fitting Instructions
Holden Commodore VU, VY, VZ
With Sports Bars
2001 - 2007
Part number: 211SB
Package includes
1 X Tonneau cover
4 x Bar Brackets
2
x
Support Bar
2 x Rivets
1 x Support Bar Sheath
1 x Lock Bracket
1 x Fitting Instructions
Страница 1: ...uctions Holden Commodore VU VY VZ With Sports Bars 2001 2007 Part number 211SB Package includes 1 X Tonneau cover 4 x Bar Brackets 2 x Support Bar 2 x Rivets 1 x Support Bar Sheath 1 x Lock Bracket 1 x Fitting Instructions ...
Страница 2: ...ted into the centre rail of the extrusion 2 Slide the aluminium with the end caps vertically up into the recessed notches behind the cab 3 Once the extrusion is all the way up on both sides rotate it 90 degrees so the plastic sewn into the cover it on the top 4 The extrusion then slides back towards the tailgate to lock it into position Using Internal Elastic Shock Cord The plastic clips on the in...
Страница 3: ...t in a tonneau cover 3 1 BASIC TOOL REQUIRED Rivet gun Drill Torch and Marking Pencil Pen You will need to buy a small Padlock make sure the padlock will go through the hole on the Tonno lock 3 2 TONNO LOCK CONTENTS 2 X 4MM Aluminium rivets 1 x Tonno Lock bracket 3 3 FITTING TONNO LOCK 1 Attach the black lock bracket to the bracket on the tonneau with your padlock and fit the tarp 2 Getting under ...
Страница 4: ...t go any further 2 Join the pieces back together and screw grub screws through the hollow bar into the holes that you drilled Make sure you do not over tighten the grub screws Then place the tonneau sheath over the bar to stop the bar wearing against the tonneau Refit the bar You may kink the bar in the middle to give it some extra height to assist with water runoff Warning if you do not fit the t...