User Manual
What's in the box
Ear Tips (S, M, L)
Ear Hooks (S, M, L)
Cable Clip
Travel Pouch
Micro USB Cable
User Manual
Overview-buttons & indicators
Ear hook
Ear tip
Indicator Light
Multifunction Button
(MFB)
Volume -
Specially-designed earbuds for exceptional comfort, fit, and sound.
(Locate the point of hook to
align with the wire)
Power on/off
Press and hold MFB button for 4 seconds until the
red indicator flashes 1 second. The headphones will
power off .
Function Operation
Sound
Power on
Power off
Press and hold MFB button for 2 seconds until the
indicator flashes blue for 1 second
beep sound prompt
beep sound prompt
Note:
The indicator will flash blue twice every 5 seconds, when the headphones are in
standby mode (not paired with devices).
The headphones will automatically power off if unpaired for more than 5 minutes.
1.
Keep your headphones turned off and within 1 meter of your phone.
2.
Press and hold MFB button for 5 seconds until the indicator lights flash red and blue,
and heard the beep sound prompting will indicate pairing mode has been activated.
3.
Activate the Bluetooth function on your Bluetooth-enabled device.
4.
Select the profile name Tribit XFree Color from the list of Bluetooth devices found by
your device and connect (input pairing code 0000 if needs).
5.
Heard the beep sound prompting and indicator lights flash blue will indicate that
pairing has been successful and the headphones are now connected.
Notes:
The headphones will automatically connect with the device they were paired with the last
time when you turned it on.
If the pairing is unsuccessful, turn off the headphones and repeat the steps above to try again.
The indicator light will flash blue once every 7 seconds when the headphones are paired
with a device or playing music.
Function
Status of headphones
Operation
Volume up
Playing music
Press V+ button
Volume down
Press V- button
Playing music
Playing music
Last track
Press and hold V+ button for 2 seconds
Playing music
Next track
Press and hold V- button for 2 seconds
Play
Music paused
Press MFB button
Pause
Press MFB button
Playing music
Hands Free Calling
Function
Status of headphones
Operation
Answer call
Incoming call
Press MFB button once
End call
During a call
Press MFB button once
Reject call
Incoming call
Press and hold MFB button for 2 seconds
Redial last phone
number
Standby mode
(already paired)
Double press MFB button
Voice dialing
Standby mode
(already paired)
Press MFB and V+ button simultaneously
for 1s.(MFB button must be pressed first)
Answer and
transferring two calls
During a call
Call transferring
between headphones
and phone
During a call
Double press MFB button
Volume up
During a call
button
Volume down
During a call
Press V- button
Press and hold MFB button for 2 seconds
to answer and end a call
Press MFB button to transferring calls
Notes:
When dialing a call, the indicator will flash blue twice every 3s.
When receiving an incoming call,the indicator will quick flash blue
When in a call, the indicator will flash blue once every 3s
When battery is low, the indicator will flash red and beep sound prompt every 60s . Charge
the Bluetooth headphones as required.
1.
Connect micro cable to the micro USB-port on the headphone control tab, and a compatible
USB dock or adapter.
2.
The indicator light will glow red to indicate charging.
3.
When the headphones are fully charged, the indicator light will change from red to blue.
Note:
The
Bluetooth Headphones require a charging input voltage of 5V, higher
input voltage or the use of quick charge adapters with higher voltage output may
damage your headphones.
The headphones must be fully charged prior to first-time use.
When connected to an IOS device, the remaining battery of the headphones will be displayed
on the IOS device.
XFree Color
In standby mode, press the V+ button and V- button simultaneously for 5 seconds to reset to
default settings. The indicator will flash blue 1s and then enter pairing mode will flash red and
blue lights.
1. I
can't
turn
on
my
Headphone.
Ensure
the
Headphone
are
fully
charged
before
use, the
device
will
not
turn
on
if
battery
is
very
low
.
2. I
can't
find
the
Headphone
on
my
device
.
Check
that
the
Headphone
are
in
pairing
mode
and
the
LED
indicator
is
flashing
blue
and
red
.
Make
sure
your
Bluetooth
device
is close
to
the
Headphone
within
3
feet.
Turn
off
the
Headphone
and
the
Bluetooth
device
,
then
turn
on
the
Headphone
and
then
restart
Bluetooth
device
.
Then
retry
the
pairing
method.
Reset
your
Headphone
and
try
again.
3. I
can
find
the
Headphone
on
the
Bluetooth
device
list
but
can't
successfully
connect
them
.
Disconnect your Bluetooth device from any previously connected devices. Restart the
Bluetooth device and retry connecting the Headphone.
Remove the Headphone from Bluetooth device list and pairing again.
Reset
your
Headphone
and
try
again.
Make
sure
the
Headphone
have
been
successfully
paired
with
your
device
.
Make
sure
the
Bluetooth
device
is
playing
music
/
audio
.
Make
sure
the
volume
is
not
too
low
or
mute
on
both
your
Headphone
and
the
Bluetooth
device.
Reset
your
Headphone
and
try
again.
Some
phones
do
not
have
the
full
stereo
music
function
,
check
by
connecting
to
another
cellphone
to
test
the
Headphone
.
5. After
pairing
,
the
sound
is
not
very
clear
/
the
caller
cannot
hear
my
voiceclearly
and
cuts
out
intermittently
.
Please
adjust
the
volume
on
your
Bluetooth
device
and
Headphone.
Units
are
out
of
range
(
within10meters
),
Bring
units
closer
together
.
Make
sure
there
is
no
interference
source
(
electrical
or
magnetic
)
nearby
.
Recharge
your
headphone
,
the
power
may
be
too
low
.
4. After
pairing
,
there
is
no
sound
in
Headphone
when
playing
music
or
answering
call
.
6. The
Bluetooth
Device
ask
for
a
password
/
pin
while
pairing
Most Bluetooth devices don't require a password / pin during pairing, but enter ”0000”
(four zeros
)
if
asked
Specifications
Bluetooth version
Bluetooth V4.1
Bluetooth profile
HFP, HSP, A2DP, AVRCP
Input
DC 5V / 0.5A
Charging time
about 2h
Working time
10h
Standby time
400h
Weight
14g
Micro USB
Installing & Wearing
Playback
Pairing Your Headphones
FAQs and Solutions
Reset
Charging the headphones
Changes
or
modifications
not
expressly
approved
by
the
party
responsible for
compliance
could
void
the
user
'
s
authority
to
operate
the
equipment
.
This
equipment
has
been
tested
and
found
to
comply
with
the
limits
for
a Class
B
digital
device
,
pursuant
to
Part
15
of
the
FCC
Rules
.
These
limits are
designed
to
provide
reasonable
protection
against
harmful
interference in
a
residential
installation
.
This
equipment
generates
uses
and
can
radiate radio
frequency
energy
and
,
if
not
installed
and
used
in
accordance
with
the
instructions
,
may
cause
harmful
interference
to
radio
communications
.
However
,
there
is
no
guarantee
that
interference
will
not
occur
in
a particular
installation
.
If
this
equipment
does
cause
harmful
interference
to radio
or
television
reception
,
which
can
be
determined
by
turning
the equipment
off
and
on
,
the
user
is
encouraged
to
try
to
correct
the interference
by
one
or
more
of
the
following
measures
:
--
Reorient
or
relocate
the
receiving
antenna
.
--
Increase
the
separation
between
the
equipment
and
receiver
.
--
Connect
the
equipment
into
an
outlet
on
a
circuit
different
from
that
to which
the
receiver
is
connected
.
--
Consult
the
dealer
or
an
experienced
radio
/
TV
technician
for
help
This
device
complies
with
part
15
of
the
FCC
rules
.
Operation
is
subject
to the
following
two
conditions
(
1
)
this
device
may
not
cause
harmful interference
,
and
(
2
)
this
device
must
accept
any
interference
received
,
including
interference
that
may
cause
undesired
operation.
FCC
Statement
Wireless Headphones XFree Color
V1.0.0
User Manual
Wireless Headphones XFree Color
