1. Visual and acoustic signals
Signal Explanation
Comment
Right code
Wrong code or code denied
Short beep
Long beep
LED green on
The lock open
LED red on
The lock closed
2. Power shut down mode
1
2
3. Opening the lock
1
2
3
☼
4
☼
4. Changing the master code
1
2
3
4
- Default factory master code is
5-6-7-8-9.
-
In order to change the master code, the unit must first be in the power shut down (sleep) mode.
-
you must wait 20 seconds before recommencing the process.
Enter your new 5-digit master code e.g.
11111
If an incorrect master code is input, the system will go to power shut down mode, following which
Enter “
*
” to activate the system from power shut
down mode.
Enter button "
Open
".
Enter your old 5-digit master code e.g.
1234
Enter the 4-digit user code e.g and then press
"
Open
".
- The lock will open and the indicator LED light will
show green.
- When the LED light goes off the bolt is fully
retracted and door handle may be pulled to open
the door.
- The lock will remain open for 7 seconds before
automatically relocking. The LED light will confirm
this by showing red.
- The door can be slam closed and locked, while the
lock is in this position .
USER MANUAL DATAGUARD WITH E-LOCK
☼
For activation the lock, enter “
*
” and the system will
be sound beep, then the lock can be operated.
The lock will be power shut down mode condition
15 second after the locked position.
Enter “
*
” to activate the system from power shut
down mode.
Open
Open
*
*
*
