![background image](http://html1.mh-extra.com/html/trac/t10219/t10219_installation-and-operating-instructions_1146766001.webp)
T10219 DeckBoat
40™
ANCHOR WINCH INSTALLATION AND OPERATING INSTRUCTIONS
This Freshwater anchor winch retrieves and deploys
river
and
mushroom
anchors using anchor rope. It features power-up,
power-down, and AutoDeploy operation from a switch located on the winch cover and from a wireless remote controller, which
can be installed
near the boat’s
helm.
GENERAL SAFETY INFORMATION -
Throughout this manual potential safety hazards will be noted with the following terms.
Please read and understand these terms before operating the product.
Danger means a hazard that
WILL
cause death or serious injury if the
warning is ignored.
Warning means a hazard that
COULD
cause death or serious injury if the
warning is ignored.
Caution means a hazard that
MAY
cause
minor or moderate injury if the warning is
ignored. It may also mean hazard that will
only cause damage to property.
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain this
anchor winch. Protect yourself and others by observing all safety information. Failure to comply with instructions could result
in personal injury and/or property damage! Retain instructions for future reference.
Always raise the anchor before moving the boat. Do NOT drag the anchor with the boat’s power. This will
cause product damage or injury. Do NOT use the anchor winch to pull the boat to the anchor position. Motor the boat toward the anchor
while retrieving the anchor rope.
SAFETY CABLE USE -
When the boat is being trailered, the anchor must be placed in the boat and secured. If
the anchor breaks free during trailering, it could cause serious damage and/or injury. Attach Safety Cable Snap-Hook around anchor shackle to
secure the anchor when boat is underway.