background image

Issue Date: 05-01-03           

                             OIPM P/N 8914                                                   Page 1 of 3

Made in 

U.S.A. 

www.tpicorp.com 

OPERATION– INSTALLATION– PARTS MANUAL

POWER MISTER

MODEL: 

PM18-S

PART NO.:       

08554702

Power requirements

……........……………………………………..........120V, 60 Hz, 2.2 Amps.

PSI Rating

...…...……...……………………………………………………………….……..130 psi 

 

Generates 2,000 Cubic Ft. / Minute of Fan Propelled fine mist vapor, cooling  

up to 200 sq.ft. (2-gallons/hr – full-on, without cycling)

Fan Motor

………………………1-Speed, 120volt, 1/8 HP, sleeve bearing, permanently 

          lubricated, totally enclosed, permanent split capacitor. 

Switch

……………………………………………….…………….Toggle (Fan Only or Fan & Mist)

Blade

…..…………………………………………..…..……………………………………Aluminum 

Power cord

...…...……………………..…….....18’ 18/3 SJT type, with molded plug GFCI Plug 

Cooler Size

……………………………………………….………………...…...……......10 Gallons 

Cooler & Fan Head Dimensions

………..………..………..………..……..

17” Wide X 20” Long 

SPECIFICATIONS 

1. Check local codes and utility standards. The 

installation must comply with their rules. 

2. Never use during rain, sleet, hail, snow or any

other inclement weather conditions. 

3. Your cooling unit will run on 120 volt AC, 60 

Hz (cycle) only. 

4. Do not operate if plug or cord is damaged in 

any way. 

5. Do not step on or roll over power cord with 

heavy or sharp objects. 

6. Do not operate unit unless all parts are 

securely in place. 

7. Remove the plug from the electrical 

receptacle by pulling on the plug and not on 
the cord. 

8. Test the GFCI safety plug monthly to ensure 

it is functioning properly. 

9. Do not operate near open containers of 

flammable liquids or gases. 

10. Do not place foreign objects through guards 

into blades. 

11. Never wash your unit with garden hose; 

water may harm motor and pump. 

12. If the unit is damaged or it malfunctions, do 

not continue to operate it. Call TPI customer 
service department at 1-800-251-0382. 

ELECTRICAL SHOCK 

HAZARD. 

x

Serious injury or death 
possible.

x

Disconnect from electrical 
supply before filling, 
servicing, or moving 
product.

x

Read and understand all 
safety information in this 
manual before using 
product.

IMPORTANT SAFETY INFORMATION

SAVE THESE INSTRUCTIONS

106711

Reviews: