1
Modem Setup Guide
– NBN FTTP
D-Link DSL-2878
Please follow the steps below to set up your D-Link DSL-2878.
1.
Ensure your
NBN Connection Box
is turned on.
2.
Plug an Ethernet cable from the
UNI-D1 port
on your NBN Connection Box into the
yellow LAN/WAN port
on your D-Link modem.
If UNI-
D1 doesn’t work, try each UNI-D port.
3.
Plug in the power cable and turn your D-Link modem on using the
Power
button on the
side.
4.
You can connect devices such as PC desktops, laptops or gaming consoles by plugging
Ethernet cables from the device to any of the remaining three
yellow
LAN ports
, or you
can connect devices via WiFi.
5.
in your browser.
6.
Log in with your D-Link modem
password
(if this was not changed, the default password
printed on a label on the back of your modem).
