![background image](http://html1.mh-extra.com/html/tp/ferdinand-ii/ferdinand-ii_assembly-and-operation_1143618001.webp)
FERDINAND II.
Assembly & Operation
Operating Instructions
Charging the battery
Make sure to completely charge the battery before your first ride.
Then recharge it after every ride.
Driving
To turn on your scooter insert the key into
the ignition lock and turn it to the right.
For safety reasons when not in operation
the scooter will shut off automatically after
5 minutes. Then to operate it, switch it off
and then on again.
To get moving, slowly turn the throttle
downwards. Accelerate with care as the
motor should not be underestimated!
During operation you can see the battery
level by referring to the indicator on the
throttle.
Connect the charger to a power
point and to the charger port
located below the ignition lock.
Charging without scooter
As an alternative you can use
the charger adapter to charge
the battery separately from the
scooter (e.g. inside your home).
Checking tire pressure
Check tire pressure regularly because it is one of the factors that can impact
the range of the scooter. It should be 3 bar for both front and rear wheels.
Adjusting the brake levers
The angle of the brake levers can be adjusted for different seat heights.
At a lower seat height it can be more comfortable if the brake levers are
turned a bit higher upwards in the direction of travel. For riders with a
greater seat height it may be more comfortable if the brake levers are
turned further downwards.
To adjust the angle, loosen the black screw on
the brake lever with the included tool. You can
then adjust the brakes as you wish. Make sure
to tighten the screw again afterwards.
Adjusting acceleration
The acceleration of Ferdinand II can be adjusted.
In its delivery state the scooter accelerates gently, making it very easy
and safe to control. If you prefer acceleration to be very quick, you can
increase the scooter’s acceleration.
Be happy
Be happy about your awesome new scooter!
Enjoy the sun and the wind in your face!
Revision February 2010 · Subject to minor technical modifications without notice, errors and omissions excepted.
Please attend the section
Driving on public streets
!
Important battery information
Batteries are subject to wear, have a limited lifespan and the warranty does
not apply to them. However, advanced Tante Paula batteries are very durable.
To extend the life of your battery we recommend the following:
Turn off the scooter after use to prevent the battery from deep discharging,
causing damage.
Recharge the battery after every use.
If not in use for extended periods charge the scooter or battery once in a
month. After charging, unplug the charger to expand it‘s lifespan.
Should you require new Tante Paula batteries, contact our customer
service – tel. +49 (700) 82683-72852 or www.tante-paula.de
You’ll find a small, black plug connector with a
blue cable at the front of the battery compart-
ment. If it is open, the scooter will accelerate
gently. If you close this connection, the accele-
ration speed of the scooter increases.
Make sure to increase acceleration only if you
have some practice enabling you to ride your
scooter safely!
Spare Parts & Repairs
Please contact us by telephone before sending parts or
scooters. Please have the serial number of
your scooter on hand for easy processing.
Tante Paula Service
Tel49(0)700-82683-72852
!