1
If you currently use a modem, disconnect it now - the Modem Router will
replace your current modem.
Connect your computer to the port labeled “LAN 1~4” on the Modem Router
with an Ethernet cable.
Connet the LINE port on the splitter to the wall jack using a telephone line.
Then use the other telephone line to connect the MODEM port on the
Note
Please use only wired network connections to configure the Modem Router.
Installation
Note
Please run the CD first, and the CD will guide you step by step to connect and
configure the device. If there are troubles in running CD, please follow the
instructions below.
Summary of Contents for TD-VG3511
Page 14: ...14 Click OK...
