1 of 6
About This Document
This document is intended for:
• Operators of TouchTunes Allegro MX-1 digital jukeboxes.
• TouchTunes Field Service, Customer Support, and Sales personnel.
It describes how to install and troubleshoot the Service Light kit for the Allegro MX-1.
Overview
The Allegro MX-1 accommodates a service light kit (PN 600098-001) that plugs into the main wiring harness and
illuminates the interior of the cabinet, facilitating servicing in low-light situations.
Figure 1 Service Light Kit, Front and Rear Views
When the door of the Allegro MX-1 is opened, components mounted on a circuit board in the interior of the cabinet
activate a panel of high-intensity LEDs that are pointed toward the service tray, providing illumination to the interior.
When the door is closed, the high-intensity LEDs are turned off automatically, unless the small bypass switch on
the control board has been depressed to keep it on permanently (available only on the 300405-001 model).
Mounted on the board is a small emitter and an infrared photo receiver.
•
The LED shines an invisible infrared light through the light pipe on to a reflective strip mounted on the cabinet
door above the payment acceptors.
Installation Notes
Allegro MX-1 Service Light Kit
July 2010
900322-001 Rev 01
emitter and I/R
receiver
LEDs
circuit board
