X2
Your TV has four VESA mounting holes on
the back. If you attach a wall-mount
bracket to the back of your TV,
the bracket
must be securely attached, using all four
holes
. If you do not use all four mounting
holes, your TV may fall and cause property
damage or personal injury. See the
documentation that came with your wall
mount for complete mounting
instructions.
Quick Setup Guide
|
40L310U QSG
40" 1080p, 60Hz, LED TV
MAKING CONNECTIONS
How do I watch TV (cable, satellite, or antenna) or connect a device such as a DVD or Blu-ray disc player or game console?
FEATURES
START HERE
How do I attach the stand to my TV? (not for wall mounting)
You’ll need
: Soft surface and a Phillips screwdriver.
WALL MOUNT
How do I prepare my TV for wall mounting?
(not for use with a TV stand)
You’ll need: Soft surface
Before you mount your TV, make sure:
• You remove the stand.
• The wall-mount bracket is listed by an independent laboratory(such as UL, CSA, or ETL).
• The bracket supports the weight of your TV.
A
Carefully place your TV face-down on a cushioned, clean surface.
B
See the instructions that came with your wall mount for
more information about how to correctly mount your TV.
A
Carefully place your TV face-down on a cushioned, clean surface.
B
Slide the TV stand over the stand legs. Make sure that the long parts of the TV stand and stand
legs point in the same direction.
C
Secure the TV stand to the stand legs using two of the provided 8 mm screws (the short screws) per stand leg.
D
Secure the stand legs to the back of your TV using two of the 12 mm screws (the long screws) per stand leg.
AAA
+
AAA
+
HDMI (BEST)
Best video quality
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
“hazardous voltage” within the product's enclosure, which may be of
sufficient magnitude to induce a risk of electric shock to persons.
The exclamation mark inside an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
1
Left side
Front
Back
Power On/Standby LED
Remote sensor
FIND YOUR USER GUIDE ONLINE!
US:
go to:
support.toshiba.com
. Type
L310U
,
click
GO
, then click
Manuals & Specs
.
Canada
: visit
support.toshiba.ca/support
For detailed product specifications, select
TV
,
LED
,
then select
40L310U.
RIGHT
LEFT
INCLUDED ACCESSORIES
Remote control and
two AAA batteries
Stand legs
TV stand
M4 screws
(8 mm length)
(4 pcs.)
M4 screws
(12 mm length)
(4 pcs.)
A
B
M4 type (8 mm) screws
C
M4 type (8 mm) screws
OR
D
A
B
2
OR
Coaxial
(GOOD)
Note:
The component and
AV jacks are shared. This means
you can connect only one
component or AV device at a
time. We suggest upgrading to
HDMI (BEST) if your device
supports it.
AUDIO/VIDEO OUT
COMPONENT
(BETTER)
AUDIO/VIDEO OUT
Note:
Connect the yellow
video cable to the green
Video/Y
jack.
AV (GOOD)
M4 type (12 mm) screws
VESA Mounting Pattern
VESA mount (mm): 200x200 - M6 Type screws
IMPORTANT:
See online
User Guide
before installing the
TV on a wall.
URL:
USA - http://support.toshiba.com
Canada- http://support.toshiba.ca/support/ceg/
HDMI 1 port can be
used for either HDMI
OR
DVI.When used for
DVI, only Video is
supported and
not Audio.
C
M
Y
CM
MY
CY
CMY
K
Toshiba_40L310U_15-0049 _QSG_V2_ENG_Final.ai 1 3/6/2015 10:09:30 AM
Toshiba_40L310U_15-0049 _QSG_V2_ENG_Final.ai 1 3/6/2015 10:09:30 AM
