Toro Z334 Z Master, Setup Instructions

Page: 1 / 12

Form No. 3357-761 Rev A
Z334 or Z340 Z Master® Mowers
Model No. For all Z334 or Z340 International Z Master Mowers
Setup Instructions
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step Description Qty. Use
1
No parts required
–
Remove the machine from the
crate.
Bolt (3/8 x 1 inch) 1
2
Nut (3/8 inch) 1
Install the seat lanyard.
Right control lever 1
Left control lever 1
Bolt (3/8 x 1 inch) (2 are assembled)
4
3
Curved washer (3/8 inch) (2 are
assembled)
4
Install the motion control levers.
4
No parts required
–
Adding fuel to the machine.
5
No parts required
–
Charge the battery.
6
Number 2 general purpose lithium
base or molybdenum base grease.
(Purchase separately.)
1 tube Check the machine for grease.
7
No parts required
–
Check the engine oil level.
8
No parts required
–
Prepare the side discharge chute.
9
No parts required
–
Check the hydraulic oil.
10
No parts required
–
Check the machine before delivery
to the customer.
Operator’s Manual
1
Parts Catalog
1
Engine Owner’s Manual 1
Registration Card 1
Safety Video 1
11
Key 2
Delivering the machine to the
customer.
© 2006—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com. Original Instructions (EN)
Printed in the USA.
All Rights Reserved