Form No. 3388-201 Rev A
TimeCutter
®
Riding Mowers
For All TimeCutter
®
Riding Mowers
Setup Instructions
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Connect the battery.
Rear hitch
1
Bolt (5/16 x 1 inch)
2
2
Locknut (5/16 inch)
2
Install the rear hitch.
3
No parts required
–
Set up the motion-control levers.
4
No parts required
–
Connect the seat-hold bar.
5
No parts required
–
Check the mower adjustment.
Ignition key
1
Hose coupling (not included with CE
models)
1
Operator's Manual
1
Engine Operator's Manual
1
6
Operator training material
1
Complete the setup.
Note:
Determine the left and right sides of the machine from the normal operating position.
© 2014—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved
*3388-201* A
