background image

Middleby Cooking Systems Group  •  1400 Toastmaster Drive  •  Elgin, IL 60120  •  (847)741-3300  •  FAX (847)741-4406

© 1999 Toastmaster, A Middleby Company.

  is a registered trademark of Toastmaster, A Middleby Company.  All rights reserved.

TC14/TC18

English

P/N 39289

Price $2.50

Rev. C • V1 • 10/99

WARNING:  IN CASE OF FIRE

Disconnect the toaster from its power source IMMEDI-

ATELY.  This allows the unit to cool, making it easier to

put out the fire.

WARNING

FOR YOUR SAFETY DO NOT STORE OR USE GASO-

LINE OR OTHER FLAMMABLE VAPORS OR LIQUIDS

IN THE VICINITY OF THIS OR ANY OTHER APPLI-

ANCE

WARNING

IMPROPER INSTALLATION, ADJUSTMENT, ALTER-

ATION, SERVICE OR MAINTENANCE CAN CAUSE

PROPERTY DAMAGE, INJURY OR DEATH.  READ

THE INSTALLATION AND OPERATING INSTRUC-

TIONS THOROUGHLY BEFORE INSTALLING OR

SERVICING THIS EQUIPMENT.

WARNING

DO NOT OPERATE THE CONVEYOR TOASTER ON

EITHER OF ITS SIDES, ON ITS REAR SURFACE, OR

WITHOUT LEGS.  PREMATURE FAILURE OF THE

HEATING ELEMENTS WILL OCCUR.

WARNING

DISCONNECT THE TOASTER FROM ITS ELECTRICAL

POWER SUPPLY BEFORE CLEANING OR SERVICING.

CAUTION

Using any parts other than genuine Toastmaster factory parts relieves

the manufacturer of all liability.

IMPORTANT

Contact your authorized service agent to perform maintenance and

repairs.  A service agency directory is supplied with your toaster.

IMPORTANT

Toastmaster (manufacturer) reserves the right to change specifica-

tions and product design without notice.  Such revisions do not entitle

the buyer to corresponding changes, improvements, additions or

replacements for previously purchased equipment.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

This manual provides detailed information for the installation and

operation of your toaster. It also contains information to assist the

operator in diagnosing problems in the event of a malfunction. This

manual is an important tool for the operator and should be kept readily

available.

I. DESCRIPTION AND SPECIFICATIONS

A. Component Location

The major components of the toaster are shown in Figure 1 below.

6. Return tray

1. Product

selection knob

5. Conveyor

2. Conveyor speed

control knob

B. Component Function (see Figure 1)

1-2. Toaster control knobs - see Section III, 

Operation

.

3.

Crumb tray - Collects crumbs from the toasted product.  The tray

can be removed for cleaning.

4.

Entry rack - Loaded with the bakery product to be toasted.  The

product then slides onto the conveyor.  The entry rack can be

removed for cleaning.

5.

Conveyor - Transports the bakery product through the toaster,

between the top and bottom heating elements.

6.

Return tray - Collects the toasted product.  The tray can be removed

for cleaning.

C. Operating and Electrical Specifications

Pre-Heat Time:  20 minutes
Electrical Specifications/TC14 toaster models:

•

120V, 50/60 Hz, 1 Ph, 1.7kW, 14.3A, NEMA 5-20P plug

•

208V, 50/60 Hz, 1 Ph, 2.1kW, 10.2A, NEMA 6-15P plug

•

240V, 50/60 Hz, 1 Ph, 2.1kW, 8.8A, NEMA 6-15P plug

Electrical Specifications/TC18 toaster models:

•

208V, 50/60 Hz, 1 Ph, 2.65kW, 12.8A, NEMA 6-20P plug

•

240V, 50/60 Hz, 1 Ph, 2.65kW, 11.1A, NEMA 6-20P plug

NOTE

Electrical wiring diagrams are provided at the back of this Manual.

Figure 1

Conveyor Toaster

Models TC14, TC18

OWNER'S OPERATING AND INSTALLATION

MANUAL

3. Crumb tray

4. Entry rack

Summary of Contents for TC14

Page 1: ...nts additions or replacements for previously purchased equipment RETAIN THIS MANUAL FOR FUTURE REFERENCE This manual provides detailed information for the installation and operation of your toaster It also contains information to assist the operator in diagnosing problems in the event of a malfunction This manual is an important tool for the operator and should be kept readily available I DESCRIPT...

Page 2: ...ERIAL PLATE SHOWN IN FIGURE 3 AND IN THE ELECTRICAL SPECIFICATIONS ON PAGE 1 OF THIS MANUAL CONSULT ALL APPLICABLE NATIONAL AND LOCAL CODES FOR FURTHER ELECTRICAL CONNECTION REQUIREMENTS 1 Before proceeding with the electrical connection check the following a Check that the electrical supply matches the toaster s requirements Refer to the toaster s serial plate Figure 3 and to the Electrical Speci...

Page 3: ...er fused disconnect 4 Allow the toaster to cool CAUTION HOT SURFACES DO NOT TOUCH HOT SURFACES ON THE TOASTER OR REACH INTO THE TOASTING CHAMBER UNTIL THE UNIT HAS COOLED THOROUGHLY 5 Wipe the exterior of the toaster with a sponge or cloth soaked in hot or warm detergent water Wipe with a clean damp cloth to remove the excess detergent and then wipe again to dry the toaster 6 Remove the crumb tray...

Page 4: ...h Configuration All Model TC14 and TC18 Toasters TOP ELEMENT BTM ELEMENT 1 BTM ELEMENT 2 CONVEYOR SPEED CONTROL PRODUCT SELECTION SWITCH TERMINAL BLOCK GND MOTOR FAN FUSE RED BLACK TOP ELEMENT BTM ELEMENT 1 BTM ELEMENT 2 CONVEYOR SPEED CONTROL PRODUCT SELECTION SWITCH TERMINAL BLOCK GND MOTOR FAN FUSE RED BLACK TRANSFORMER 230V p 115V s CONVEYOR SPEED CONTROL PRODUCT SELECTION SWITCH TERMINAL BLOC...

Reviews: