![background image](http://html1.mh-extra.com/html/toa/em-380-am/em-380-am_instruction-manual_1122725001.webp)
INSTRUCTION MANUAL
GOOSENECK MICROPHONE
EM-380-AM
Thank you for purchasing the TOA gooseneck microphone.
Carefully follow the instructions in this manual to ensure prolonged and trouble-free use of your equipment.
1. OVERVIEW
TOA's EM-380 gooseneck microphone has a unique shape and a high-quality condenser microphone designed for use in
conference rooms, places of worship and voice applications.
This product is equipped with an optional power supply that can be selected between battery power or phantom power.
2. FEATURES
l
When you press the button, the microphone turns on or off.
l
Operation of the microphone by selecting the battery or ghost switch on the back of the microphone.
l
Use two "AA" size batteries
.
3. BEFORE USING THE UNIT
Prepare two AA (3 VDC) batteries or phantom power from 9 to 52 VDC to operate the unit.
4. NOMENCLATURE AND FUNCTIONS
5. BATTERY
5.1.
Life expectancy
The application and use of the battery for speech and voice is assumed, as shown in the following table
Application
3 hours / week
3 hours / day
Times*
Discourse
20 months
3 months
-
Paging
-
-
92,500
※
Approximately it is assumed to use a time voice de 10 seconds
Foam Filter
(Accessory)
[Rear]
[Bottom]
1. Microphone
Closed type cardioid electret condenser microphone.
The gooseneck shaft makes it easy to position the microphone
for optimal acoustic effect.
2. Gooseneck lamp
Light blue when the microphone is on and will turn off when the
microphone is in off mode.
3. Ignition lamp
Like the gooseneck lamp, the power lamp will turn on when the
microphone is on and turn off when the microphone is off.
Note: If the battery is low, the lamp will turn off, but the
microphone can still be used.
It is recommended to change the battery when this happens.
4.
Microphone on/off button
Press this key to turn the microphone on or off.
5.XLR Output Balance
The microphone output impedance is 750 ohms.
Use the supplied cable to connect it to an amplifier.
6. Selector
Select this switch to use battery or phantom as the power supply
for this unit.
Note: It is recommended to
use the supplied cable or a b-to-
lance cable, especially if you use phantom power.
Otherwise,
the gooseneck lamp and the ignition lamp are dimly lit, although
the unit may function normally.
7. Battery compartment
Place AA batteries (2 pcs).