Tiptel.com GmbH Business Solutions – Halskestraße 1 –
40880 Ratingen –
Deutschland –
www.tiptel.com
Operation of tiptel IP 284/286
at tiptel.com and tiptel.comPact telephone systems
as per August, 19, 2011
1. Introduction
With telephone systems tiptel.comPact 42/82 IP 8 and tiptel.com 410/411/810/811 with tiptel VoIP-CP
4/8 or tiptel VoIP-CP 8/16 module any IP telephones with SIP standard may be used as extensions.
IP telephones tiptel IP 284 or tiptel IP 286, however, can even be used as system telephones. Those
telephones can be equipped with up to two key modules type tiptel KM 38 or tiptel KD 39.
This supplementary manual is about the set-up of these telephones as system telephones.
2. Update of the telephone system
The firmware version must be 7.3.3 or higher. You can check the version in the web configuration
interface under "Settings" in the upper navigation and then in the left hand navigation "Advanced
mode" -> Service". Is it below 7.3.3 please carry out an update.
3. Preparation of the IP telephone
tiptel IP 284/286 must have firmware version 6 or higher. Please check the version via Menu -> Status
at the telephone. The second and third digit describe the main version which must be higher than 60.
If this is below 60 just disconnect your telephone form mains for a moment. When re-starting the
telephone will automatically download the latest firmware from the update server. In order to be able to
do so the telephone must be connected to the network and have internet access.
There may be no accounts active in the telephone. Check this in the web configuration under
"Account" and set accounts which are active to inactive.
4. Setting up the telephone system
Go to "Ports" in the upper navigation in the web interface and then in the left hand navigation go to
"SIP (VoIP) -> Settings".
Make sure that you have set port 5062 as local SIP port and port 5060 as SIP-Proxy-Address.
Then in the upper navigation go to "Subscriber" and then in the left hand navigation go to "Subscriber -
> Administrator".
For the new IP telephone create a new subscriber or edit an already existing subscriber.
