![background image](http://html1.mh-extra.com/html/tipro/free/free_getting-started_1118705001.webp)
guide the cables through
the main cable channel
pull out for RS232 Touch
pull out for analog Audio
jumper status for advanced interface settings
pull out for PS/2 & RS232 Controller
close the connection
cover and secure it by
pressing both snaps!
Before using
your FREE+,
set the
resolution of
your Video card
to 1024×768
and the refresh
rate to 60Hz!
and an external
FREE module if
present
you can also connect up to
2 other USB devices
connect the power supply
connect the USB controller
to the PC
open
the connection
cover
remove the
cable cover
if the cables exit at
the back remove the
back part of the
cable cover
put back the cable cover
and fix the 6 screws
provide sufficient
airflow around the
power supply *
*operating ambient temperature range is 0°C to 40°C
USB A are active if USB B is connected
Note:
SEC KBD is active if PS/2+RS232 is connected
then VGA
This is a Class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
WARNING:
1
4
3
2
with
FREE+
Getting started