1
ENGLISH 098095000
Register your product at www.timex.com
REVISED 12.1.16
EXTENDED WARRANTY
Available in U.S. only.
Extend your warranty for an additional 4 years
from date of purchase for $5. You can pay with AMEX, Discover, Visa or
MasterCard by calling 1 800-448-4639 during normal business hours.
Payment must be made within 30 days of purchase. Name, address,
telephone number, purchase date, and 5-digit model number required. You
can also mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676,
Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your Timex
®
watch.
Your model may not have all of the features described in this
booklet.
FUNCTIONS
Real-time calendar clock, Second time zone, Countdown timer, Daily/
weekday/weekend alarm, Hourly chime, Chronograph with lap/split storage,
INDIGLO
®
night-light with Night-Mode
®
Feature.
BASIC OPERATION
When setting, each button has a different function as indicated above.
Watch face will indicate when button changes function.
TIME/DATE/HOURLY CHIME
1. In TIME mode, press and hold SET/RECALL. Time zone will fl ash.
2. To set, push + or – to select fi rst or second time zone.
3. Press NEXT. Hour digits fl ash.
4. Press + or – to change hour including AM/PM. (Scroll through 12 hours
to get to AM/PM).
5. Press NEXT. Minute digits fl ash.
6. Press + or – to change minutes.
7. Press NEXT. Second digits fl ash.
8. Press + or – to set seconds to zero.
9. Continue pattern to set month, day of month, year, 12-hour or 24-hour
time display, MM.DD or DD.MM date format, turn hourly CHIME on/off,
turn BEEP on/off. If you select BEEP on, a beep will sound every time
you push a button (except INDIGLO
®
).
10. Press DONE to confi rm and exit or NEXT to continue and set second
time zone, if desired.
11. When in Time mode, press and hold START/SPLIT to “peek” at second
time zone; hold for 4 seconds to switch time zones.
ALARM
Setting the ALARM is similar to setting TIME.
1. Press MODE repeatedly until ALARM appears.
2. Press SET/RECALL to set alarm.
3. Hour digits fl ash. Press + or – to change hour.
4. Press NEXT. Minute digits fl ash. Press + or – to change minutes.
5. Press NEXT. If in 12-hour format, AM/PM fl ashes. Press + or – to change.
6. Press NEXT. Press + or – to select DAILY, WEEKDAYS OR WEEKENDS.
7. Press DONE to confi rm and exit.
8. Press Start/Split or Stop/Reset to arm or disarm alarm. When disarmed,
OFF will be displayed. When armed, the alarm clock icon will appear
t
.
9. The INDIGLO
®
night-light and alarm icon fl ashes and an alert sounds
when the alarm goes off. Press any button to silence. A back up alarm will
sound after fi ve mintues if you don’t press any buttons.
TIMER
1. Press MODE repeatedly until TIMER appears.
2. Press SET/RECALL. Hour digits fl ash.
3. Follow same pattern as setting TIME and ALARM to set hours, minutes,
seconds, and select between REPEAT/AT END (timer counts down and
then repeats) or STOP/AT END (the timer counts down and then stops).
4. Press DONE to confi rm and exit.
5. Press START/SPLIT to start TIMER. Timer will continue to run even if you
exit Timer mode. If REPEAT/END selected
h
will fl ash. If STOP/END
selected
H
will fl ash.
6. An alarm melody will chime when the timer has reached zero or before it
starts to count down again.
7. Press STOP/RESET to stop TIMER. Press again to reset to countdown
time.
CHRONO
LAP 1 = 7.11
LAP 2 = 7.50
SPLIT 2 = 15.01
LAP 3 = 7.08
SPLIT 3 = 22.09
LAP 4 = 7.30
SPLIT 4 = 29.39
SPLIT 1 = 7.11
1. Press MODE until CHRONO appears.
2. Press and hold SET/RECALL.
3. The Display will read: FORMAT/SET, then select LAP/SPL or SPL/LAP
options.
4. Press + or – to select desired format.
5. Press DONE to confi rm and exit.
6. To use chrono, press START/SPLIT. Chrono continues to run even if you
exit the mode.
7. Press STOP/RESET to stop chronograph from running OR while chrono is
running, press START/SPLIT to take a split. Lap and split times will then
be displayed in the format you selected. The lap number will alternate
with the last two digits of the bottom line.
NOTES:
• Lap and split times will appear frozen for 10 seconds. Press MODE to
release the display and see running chrono.
• While chronograph is running or stopped, press SET/RECALL, then press
+ or – to scroll through stored laps or to recall stored laps/splits. Press
SET/RECALL again to return to running chronograph.
• Press and hold STOP/RESET to reset chronograph.
INDIGLO
®
NIGHT-LIGHT/NIGHT MODE
®
FEATURE
Press INDIGLO
®
button to activate night-light. Electroluminescent technology
used in INDIGLO
®
night-light illuminates entire watch face at night and in low
light conditions. While the night-light is on pressing any button keeps it on for
three seconds.
Press and hold INDIGLO
®
button for 4 seconds to activate NIGHT-MODE
®
Feature. Moon icon
P
will appear. Once activated, any button pushed will
cause INDIGLO
®
night-light to stay on for 3 seconds. NIGHT-MODE
®
Feature
will stay activated for 8 hours or until deactivated by pressing and holding
INDIGLO
®
button again for 4 seconds
WATER AND SHOCK RESISTANCE
If your watch is water-resistant, meter marking or (
O
) is indicated.
Water-Resistance Depth
p.s.i.a. * Water Pressure Below Surface
30m/98ft
60
50m/164ft
86
100m/328ft
160
*pounds per square inch absolute
SET/RECALL
OR DONE
(To save
changes and exit
setting)
MODE OR NEXT
(Proceed to
next step)
START/SPLIT OR +
(Increase value. Hold to
increase rapidly)
STOP/RESET
OR –
(Decrease value. Hold to
decrease rapidly)
INDIGLO
®
Button
