Thornthwaite Toilet Backrest
Installation Manual
1.
Sub-assemble
backrest (1)
2.
Insert
upper wall wall mounts with white
plugs (2 & 3) into support tubes (1A & 1B)
3.
Adjust the distance between wall mount flang-
es to 76 mm less than the measurement be-
tween vertical wall marks and gently tighten
grub screws
4.
Place top centre of the
upper wall mount
flanges (2 & 3)
on the top fixing mark and mark preferred fixing holes
5.
Insert
lower wall mounts with grey plugs (4 & 5)
into
support tubes (1C & 1D)
and repeat from step 4 with lower wall mounts
7. Tighten all wall fixings
8. Centre
backrest (1)
to toilet and tighten
grub screws (6)
Top Fixing
Mark 937 mm from floor and 70 mm
either side of cistern.
Bottom Fixing
Mark wall 642 mm from floor and 70
mm either side of cistern.
Wall Fixing
Assembly
A50154 &
A50155
NOTE: Loosen grub screws (6) before commencing installation
