background image

SERVICE MANUAL
DOCUMENTATION TECHNIQUE
TECHNISCHE DOKUMENTATION
DOCUMENTAZIONE TECNICA
DOCUMENTACION TECNICA

No copying, translation, modification on other use authorized. All rights reserved worldwide. • Tous droits de reproduction, de traduction, d'adaptation et d'exécution réservés pour tous les pays. • Sämtliche Urheberrechte an diesen Texten und Zeichnungen stehen uns zu. Nachdrucke,
Vervielfältigungen - auch auszugsweise - nur mit unserer vorherigen Zustimmung zulässig. Alle Rechte vorbehalten. • I diritti di riproduzione, di traduzione, e esecuzione sono riservati per tutti i paesi. • Derechos de reproduccion, de traduccion, de adaptacion y de ejecucion reservados para todos los paises.

WARNING :  Before servicing this chassis please read the safety recommendations.

ATTENTION :  Avant toute intervention sur ce châssis, lire les recommandations de sécurité.

ACHTUNG :  Vor jedem Eingriff auf diesem Chassis, die Sicherheitsvorschriften lesen.

ATTENZIONE :  Prima di intervenire sullo chassis, leggere le norme di sicurezza.

IMPORTANTE :  Antes de cualquier intervención, leer las recomendaciones de seguridad.

Code : 351 477 60 

- 0401 / 00M -             Print. 

42WS90E3

T V

Plasma

WYSIUS3.XPR  19/04/01 15:37  Page 1

Summary of Contents for 42WS90E3

























Reviews: