![background image](http://html1.mh-extra.com/html/thermoworks/tw-usb-1/tw-usb-1_quick-start-manual_1106353001.webp)
FIRST INSTALL YOUR BATTERY
Before using the data logger you will need to insert the 3.6V 1/2AA battery provided, following
the instructions below. Replacement batteries available from www.thermoworks.com,
PN: BAT 3V6 1/2AA.
Before using the data logger you will need to insert the 3.6V 2/3AA High Temperature battery
provided, following the instructions below. Replacement batteries available from:
www.thermoworks.com, PN: BAT 3V6 2/3AA H TEMP.
TW-USB-1, TW-USB-1-LCD, TW-USB-2, TW-USB-2+, TW-USB-2-LCD,
TW-USB-2-LCD+, TW-USB-TC, TW-USB-TC-LCD
1
TW-USB-1 PRO
TW-USB-1-RCG BATTERY IS PREINSTALLED
THEN DOWNLOAD AND INSTALL YOUR SOFTWARE
& USB DRIVER
Windows ™ XP/VISTA/7
2
1. Visit
www.thermoworks.com/software and
click ‘download’ on the EasyLog USB Software.
2. Click on the downloaded file and hit extract
all files.
3. Open the EasyLogUSB file and double-click
on ‘Setup.’
4. Click on ‘Run.’
5. Click ‘Next’
6. Read the ‘IMPORTANT NOTICE’,
select ‘I agree’ and ‘Next’
7. Click ‘Install’
8. Click ‘Yes’
9. Click ‘Finish’
10. Click ‘Install’
11. You have successfully installed the
necessary software and driver for your
TW-USB data logger. An ‘EasyLog USB’
icon will be placed on your desktop.
YOUR DATA LOGGER IS READY FOR USE
Ensure the battery is correctly installed.
.
.
.
.
.
3
When setup is complete, the data logger should be removed from the
USB port to begin recording. If you would like advice on how best to use
the data logger for a particular application, please contact your nearest
ThermoWorks representative.
Do not leave your data logger in the USB port as this will cause some
of the battery capacity to be lost
(with the exception of TW-USB-1-RCG;
see ‘1. First Install Your Battery’ for further information).
Double click on the EasyLog USB icon on your Windows™ desktop.
This will load the configuration software. Setup the data logger for a
new log, download a data logger that has been recording,
view previously saved data in graph format, and check the
current status of the attached data logger (including the
serial number).
Insert the data logger into an available USB port on your PC.
To charge the battery, connect to USB port until green LED shows.
1
2
3
4
QUICK START GUIDE
.
Set-up, stop or view previously saved data
.
Name your logger and select a sample rate
1
2
3
4