![background image](http://html.mh-extra.com/html/therma-stor/phoenix-ts-285/phoenix-ts-285_installation-operation-and-service-instructions_1101961001.webp)
Owner’s Manual — Phoenix Axial Air Mover
Installation, Operation & Service Instructions
www.thermastor.com • [email protected]
Toll-Free -800-533-7533
Read and Save These Instructions
Phoenix Axial Air Mover
TS-285
The Phoenix Axial Air Mover is the industry’s only Air Mover specifically engineered with patent pending
FOCUS
TM
Technology. FOCUS
TM
Technology revolutionizes evaporative drying by producing air velocities
greater than competitive product offerings. This highly focused air flow is directed towards the restoration
industry’s problematic drying areas namely, carpet and pad, sub-floor, sill plate and walls. No other fan
dries the sill plate as quickly! Finally, the Phoenix Axial Air Mover with FOCUS
TM
Technology sustains these
air velocities further than any other Axial Air Mover.
The Phoenix Axial Air Mover includes a 2-speed motor delivering a focused
airstream of approximately 3000 cfm, lightweight stackable
enclosure designed to fit existing vehicle rigging, on-board duplex
GFCI outlet, circuit breaker, superior cord management and hour
meter.
Conventional air movers create a circular air jet. With a circular
air jet the only way to get air into the square corner is to point
the fan towards the corner. This angle toward the wall wastes
valuable air velocity and throw distance. FOCUS
TM
Technology
creates an air jet with a square corner, resulting in optimized
drying ability. In addition, the Axial Air Mover features built in
4.5° positioning which increases the fans ability to dry.
Dry fast, smart and profitably with Phoenix.
Phoenix Axial Air Mover
• Approximately 3000 CFM air flow directed where
you need it.
• Operator interface conveniently located for easy
access, featuring: power indicator lamp, large three-
position switch, circuit breaker, GFCI outlet, and
hour meter.
• Daisy-chain up to four Phoenix Axial Air Movers on a
single circuit.
• Integral circuit breaker eliminates nuisance trips to
the breaker box.
• Axial Air Mover itself is also GFCI protected.
• Units interlock for ease of stacking during storage
and handling.
• Weighs 2.5 lbs less than competitive units.
• Linear low density polyethylene construction.
• Low bearing temperatures increase motor life.
• Permawick®, low maintenance, long life lubrication.
Specifications subject to change without notice.
Revised 1/07
Phoenix Axial Air Mover
PN 4025200
PO Box 8680 • Madison, WI 53708