![background image](http://html1.mh-extra.com/html/theben/theleda-s10-bk/theleda-s10-bk_instructions_1101224001.webp)
1
theLeda S10 WH
1020921
theLeda S10 BK
1020922
theLeda S20 WH
1020923
theLeda S20 BK
1020924
theLeda S10 W WH
1020931
theLeda S10 W BK
1020932
theLeda S20 W WH
1020933
theLeda S20 W BK
1020934
LED spotlight with
motion detector
EN
307286 01
1. Basic safety information
Danger of death through electric shock or fire!
¾
¾
Installation should only be carried out by a
qualified electrician!
WARNING
!
Only intended for installation out of arm‘s reach.
!
High temperature! Do not touch the
metal parts of the device.
L
The LED spotlight with motion detector (PIR) conforms to
EN 60598-1 and EN 60669-2-1 if correctly installed
L
IP 55 in accordance with EN 60529
L
Optional with corner angle (9070969/
9070987)
and distance frame (9070971/
9070988)
2. Proper use
•
LED spotlight is used for lighting, depending on
presence and brightness
•
Device is for wall mounting inside and outside
•
For entrances, garages, gardens, corridors, parks, etc.
•
For use in normal ambient conditions
L
Lamp cannot be replaced.
Replace entire spotlight if defective!
Disposal
¾
Dispose of device in environmentally sound manner
3. Connection
Danger of death through electric shock or fire!
¾
¾
Installation should only be carried out by a
qualified electrician!
WARNING
¾
Disconnect power source!
¾
Ensure device cannot be switched on!
¾
Check absence of voltage!
¾
Earth and bypass
¾
Cover or shield any adjacent live components
N
L
N
L
4. Installation
Installation instructions
Danger of death through electric shock or fire!
¾
¾
Installation should only be carried out by a
qualified electrician!
WARNING
L
Observe the recommended installation height of
1.8 m–2.5 m!
3.5 m
1 m
3 m
10 m
1 m
3 m
10 m
3.5 m
1 m
3 m
10 m
1 m
3 m
10 m
As the LED spotlight reacts to variations in temperature, avoid
the following situations:
L
Do not direct the LED spotlight at objects with highly-
reflective surfaces such as mirrors etc.
L
Do not install the LED spotlight near heat sources, such as
heating outlets, air conditioning systems, lamps etc.
L
Do not direct the LED spotlight at objects that move in the
wind, such as curtains, large plants etc.
L
Pay attention to the direction of motion during the test run