DACx300x 12-Bit and 10-Bit Ultra-Low Power Dual and Single Voltage and Current
Output Smart DACs With Auto-Detected I
2
C, PMBus™, or SPI Interface
1 Features
• Programmable voltage or current outputs with
flexible configuration:
– Voltage outputs:
• 1 LSB INL and DNL (10-bit)
• Gains of 1x, 1.5x, 2x, 3x, and 4x
– Current outputs:
• 1 LSB INL and DNL (8-bit)
• Unipolar and bipolar output range options
from 25 μA to 250 μA
• 35-μA/channel I
DD
in voltage-output mode
• Programmable comparator mode for all channels
• High-impedance output when VDD is off
• High-impedance and resistive pulldown power-
down modes
• 50-MHz SPI-compatible interface
• Automatically detected I
2
C, PMBus
™
, or SPI
interface
– 1.62-V V
IH
with V
DD
= 5.5 V
• General-purpose input/output (GPIO) configurable
as multiple functions
• Predefined waveform generation: sine, cosine,
triangular, sawtooth
• User-programmable nonvolatile memory (NVM)
• Internal, external, or power-supply as reference
• Wide operating range:
– Power supply: 1.8 V to 5.5 V
– Temperature: –40˚C to +125˚C
• Tiny package: 16-pin WQFN (3 mm × 3 mm)
2 Applications
•
•
•
•
3 Description
The 12-bit DAC63001 and DAC63002, and the 10
‑
bit
DAC53001 and DAC53002 (collectively referred to as
the DACx300x) are a pin-compatible family of ultra-
low-power, single-channel and dual-channel, buffered
voltage-output and current-output smart digital-to-
analog converters (DACs). The DACx300x devices
support Hi-Z power-down mode and Hi-Z output
during power-off conditions. The DAC outputs provide
a force-sense option for use as a programmable
comparator and current sink. The multifunction GPIO,
function generation, and NVM enable these smart
DACs for
processor-less
applications and design
reuse. These devices automatically detect I
2
C,
PMBus, and SPI interfaces and contain an internal
reference.
The feature set combined with the tiny package and
ultra-low power make these smart DACs an excellent
choice for applications such as land mobile radios,
pulse oximeters, notebook PCs, and other battery-
operated applications for biasing, calibration, and
waveform generation.
Device Information
PART NUMBER
BODY SIZE (NOM)
DACx3001
WQFN (16)
3.00 mm x 3.00 mm
DACx3002
(1)
For all available packages, see the orderable addendum at
the end of the data sheet.
DAC
Register
BUF
Digital Inter
face
AGND
VDD
DAC
INT
REF
NVM
CAP
LDO
+
-
FB0-1
OUT0-1
GPIO/SDO
A0/SDI
SCL/SYNC
SDA/SCLK
VREF
R1
Channel 0
Function
MUX
R2
Channel 1
Simplified Block Diagram
DAC53001, DAC53002, DAC63001, DAC63002
SLASF48 – MAY 2022
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
