background image

Music In Every Room Ltd

Tenor Audio Mirror

Bluetooth

FM/DAB Radio

Switching on for the first time

Use the Remote Control for all set-up functions

Remove the battery cover and remove the battery protector’s plastic strip.
Press power       to turn on the unit. The mirror will turn on in DAB mode.

DAB Stations

The DAB radio may run an auto-scan. Do not interrupt while scan is in progress. 

At the end of the scan, the LCD will display the number of DAB stations detected. 

Stations are found alphabetically (eg Absolute to XFM). If scan does not start 

automatically, then press      on the remote control.
You can fast click          to scroll through DAB stations. When you reach the 
required station press       .
If no DAB stations are received, check your aerial connection. If the aerial 

connection is good you may be in an area with poor, or no, DAB signal. Check 

station availability at www.ukdigitalradio.com.
If you wish to rescan, press 

      

on the Remote Control.

Favourite DAB stations can be saved to presets, see 

User Instructions

.

FM Stations

Press        to scroll to FM

Press        tuner will scan to the next FM station

or hold          f

or 2 seconds to scan to next FM station

Favourite FM stations can be saved to presets, see 

User Instructions

.

Mode

Repeat press of 

       

scrolls through DAB, FM, Bluetooth™, Aux.

Bluetooth™

Press      to scroll to Bluetooth™ (displayed as “BT mode”)

Initiate Bluetooth™ on your device (iPhone/iPad etc). This is usually done in “Settings”. Turn Bluetooth™ on, ensuring 

the device is in discoverable mode. The mirror will appear as “Radio Mirror”. No access code is required.
You can now stream from your Bluetooth™-enabled device.
To disconnect your Bluetooth™-enabled device and link another, first press      to disconnect the first device. Initiate 

Bluetooth™ on the second device and link as above.

EQ Set

Press      Repeat press to scroll through the EQ settings to select your favourite tone.

Classic, Rock, Jazz, Pop, Flat or set your own levels with “My EQ” (bass, treble).

This completes the installer check.

 

See 

Detailed Set-Up and Operating Instructions

 for other functions and preferences.

Reviews: