Tenma 72-7210 Function Generator
Quick Guide
The Tenma 72-7210 Function generator is a single output repetitive function generator.
It is capable producing a sine, triangle or square wave with an adjustable frequency and
amplitude. The waveform symmetry and base amplitude voltage can be modified, as
well as setting the frequency up to sweep between to limits at an adjustable rate.
Display and Display mode:
The frequency output display can be set to display the output frequency of the function
generator or can be used to measure an external digital frequency.
The ON button switches the display to the external counter
mode. With the button left out, the display will show the value
of the internal frequency generator.
The display indicates the frequency and the lit indicator to the right of the display
indicates the frequency range.
Frequency setting:
The output frequency is controlled by a combination of two controls. The range buttons
switch the range of the output, rotating through setting from (1-
560) mHz
[.001 to .560 Hz]
up through (3.6 – 6.2) MHz. Some
ranges have multiple settings. An example of this is the KHz
range selection has 3 selections, each increasing a decade.
