BRAVO KBD
Wireless Control Keyboard
Installation and Operation User Manual
Attention!
This manual contains information on limitations regarding
product use and function and information on the limitations as to liability of the
manufacturer. The entire manual should be carefully read!
General Description
BRAVO KBD is a wireless control LED keyboard for operation with BRAVO
panels. The keyboard is equipped with a wide-angle detection dual sensor for
automatic activation of the buttons backlight in case of movement in front of it.
The built-in light sensor detects the amount of ambient light in the room and
controls the keyboard backlight activation for improving the battery life and
conserve more energy.
Functional Features
•
Arming (Full or Stay Arming Mode) and Disarming of the system
•
LED indication for system status – armed, disarmed, technical trouble,
memory events
•
Supports operation with up to 6 User codes and 1 Manager
•
Built-in sensors for buttons backlight activation and ambient light
•
Wall mounting bracket
Package contents
In the packing box of BRAVO KBD are included the following additional parts:
•
2 pcs anchors (ø6x30) and 2 pcs screws (3.5x30) suitable for mounting on
brick wall.
Note: In case the device needs to be mounted on other type of
surface, it is required to use supporting elements that hold 900N downwards
force.
•
2 pcs battery, type CR123A, placed into keyboard battery holder
•
1 pc mounting bracket (on the back of keyboard)
Technical Characteristics
Certified
RED directive
Battery (type CR123A)*
2 х 3 V/ 1500mAh
Battery life
~1.5 years
Operation frequency
~868 MHz
Communication type
Two-way
Radio distance (open space) Up to 400m
Indication type
LED
Working temperature
-20°C - +55°C
Mounting height
1.5 - 3.6 m (2.1 m)
Dimensions
102 x 84 x 25 mm
Weight (including batteries)
~140g
BRAVO KBD Elements
Front view
Side view
Rear view
1 -
Operation buttons:
0-9
- Digit buttons for entering of user codes, address numbers, values
#
- Enter into keyboard programming menus; confirmation of entered
codes or values
X
- Cancel the operation; step back in programming menus; exit from
programming menus
2
- System status buttons and indication - see on the next page
3
- Built-in sensors for buttons backlight activation and ambient light
4
- Tamper switch
5
- ENROLL Button
6
- RESET Button
7
- Mounting bracket
8
- Battery compartment
Installation Instruction
IMPORTANT NOTES:
The BRAVO KBD wireless keyboard should be
installed in a minimum distance of at least 2 meters far from other sources
of radio signals (power lines, Wi-Fi or Bluetooth routers, wireless telephone
stations, etc.)
The minimum distance between the BRAVO panel and enrolled BRAVO KBD
keyboard must be 1 meter to guarantee the proper operation of the system.
You should consider also that the presence of electromagnetic
disturbances may trigger the near field sensor of BRAVO KBD and to
turn on the background lights of the device!
SAFETY PRECAUTIONS:
Keep new and used batteries away from children!
If the battery compartment does not close securely, stop using the product and
keep it away from children’s reach. If swallowed, the coin-sized and other type
batteries can cause serious injuries and burns in just 2 hours. In case of any
doubt for swallowing of a battery, seek for medical help immediately!
Mounting Bracket
1
- Slide down the mounting bracket to unlock the side pins.
2
- Pull up the bracket outside the rear back cover.
3
- Use the screws from the kit to mount the bracket on the place of
installation.
4
- When the enrollment of the keyboard is finished, place it to the bracket as
first match the side pins into the holes and then pull down to lock.
Batteries Compartment
3V
(CR123A)
+
- +
-
3V
(CR123A)
1
- Use a flat screw-driveр to press slightly the clip of the batteries
compartment.
2
- Pull up the screw-driver to open.
3
- Press the cover of the compartment downwards.
4
- Pull up the protective folio of the batteries to power up the keyboard and to
start enrollment to the system configuration.
5
- Close the batteries compartment.
Enrollment to the BRAVO System Configuration
The BRAVO panel supports operation with only one BRAVO KBD!
• Prepare the BRAVO KBD keyboard for enrollment to the system – remove
the cover of the batteries compartment and pull out the protection folio. Close
the cover. The system status indicators are blinking one-by-one in series – the
keyboard is ready to be enrolled.
• Enter in “Device enrollment” mode of the panel.
• The system enters in the menu for detectors enrollment. Press the
“Programming” button of the panel to move to the menu for key fobs
enrollment – this is the menu for enrolling the keyboard. The LED indicator
under the key-fob icon is lighting on and the position 1 is blinking.
The
numbers of the free positions (with no key fobs enrolled) are lighting in green,
and those with already enrolled key fobs – in red. The currently selected
position number is blinking.
• Use the buttons with arrows to select a number of a free position – the
number is blinking in green.
• Press a random digit button or the ENROLL button on the rear cover of the
keyboard. The icon for arming starts blinking in red.
• The panel confirms the successful enrollment with a sound signal, and the
selected position number is blinking in red. The keyboard will also confirm
the enrollment with three short beeps and blinking of the icon for disarming in
green.
• After exit from “Device enrollment” mode, the keyboard is ready to use.
Resetting of BRAVO KBD
The resetting of a device is restoring of its default factory settings.
To reset the BRAVO KBD:
With batteries on, press the “RESET” button on
rear cover for 3-5 seconds until you see 3 green blinks from the icon for
disarming. The system status indicators are blinking one-by-one in series –
the keyboard in not enrolled to the system.
Sound Signalization of BRAVO KBD
Sound
Description
Button
Single short beep indicating the pressing of a key.
Confirmation Three sound signals, indicating the system confirmation for
executed operation; entry/exit the programming menus.
Cancellation A single long beep, incorrect operation or rejection.
Entry time
Continuous beep, indicating intrusion into an entrance zone
when the system is armed.
Exit time
Short beeps, indicating the system is armed and the user is
required to leave the entrance zone. Ten seconds before the
exit time is over beep frequency increases.
Technical
trouble
Two short beeps at every 20 sec, indicating a technical
trouble. To stop the signalization - press the ATTENTION
button on the BRAVO panel. You can disable the Trouble
Signalization of the keyboard at address 20.
* ATTENTION:
Use only Panasonic
batteries approved
by the manufacturer,
type CR123A 3V/
1500mAh! Use only
IEC 60086-4 tested
batteries!
EN50131-1
EN50131-3
Grade 2 Class II
