ENGINEERED CLIMBING
telesteps.net
model: TSO
How to Install
How to Remove
Push round black button, slide
the hook outwards you.
Push round black button, slide
the hook outwards you.
Push round black button, slide
the hook outwards you.
Push red button in the
direction of the arrow, slide
black connector piece up to
disconnect from tray.
Repeat, keeping black
connector pieces separate,
as there is corresponding
left piece and a right piece.
Push red button in the
direction of the arrow, slide
black connector piece up to
disconnect from tray.
Repeat, keeping black
connector pieces separate,
as there is corresponding
left piece and a right piece.
Push red button in the
direction of the arrow, slide
black connector piece up to
disconnect from tray.
Repeat, keeping black
connector pieces separate,
as there is corresponding
left piece and a right piece.
After removing the two black
connector pieces, place the
tray just below the top rung of
the ladder to be used.
Pushing red buttons again,
slide the two black connector
pieces back in place on correct
sides, until locked.
After removing the two black
connector pieces, place the
tray just below the top rung of
the ladder to be used.
Pushing red buttons again,
slide the two black connector
pieces back in place on correct
sides, until locked.
After removing the two black
connector pieces, place the
tray just below the top rung of
the ladder to be used.
Pushing red buttons again,
slide the two black connector
pieces back in place on correct
sides, until locked.
Slide tray upwards till the hook
can connect to the top rung.
Installation completed.
Push round black
button, disconnect
hook from top ladder
rung, and slide the tray
downward.
Push red button in the
direction of the arrow,
slide black connector
piece up to disconnect
from tray. Repeat with
second red button.
Remove tray, reinstall
black connector pieces
on tray.
Slide tray upwards till the hook
can connect to the top rung.
Installation completed.
Push round black
button, disconnect
hook from top ladder rung, and
slide the tray downward.
Push red button in the direc-
tion of the arrow, slide black
connector piece up to discon-
nect from tray. Repeat with
second red button.
Remove tray, reinstall black
connector pieces on tray.
Slide tray upwards till the hook
can connect to the top rung.
Installation completed.
Push round black
button, disconnect
hook from top ladder rung, and
slide the tray downward.
Push red button in the direc-
tion of the arrow, slide black
connector piece up to discon-
nect from tray. Repeat with
second red button.
Remove tray, reinstall black
connector pieces on tray.
English
OUTSIDE CORNER
TOOL TRAY
INSIDE CORNER
ES STEP LADDER
FLAT WALL
English
French
French
French
French
French
French
French
Spanish
Spanish
Spanish
Spanish
Spanish
Spanish
Spanish
MADE FOR USE ON TELESTEPS SERIES E, EP, ET, ES.
ONLY TO BE USED ON THE SECTION JUST BELOW THE TOP RUNG.
1
2
3
4
1
2
