Teledyne FLIR
Infrared Camera OEM
1
Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is prohibited.
Imagery for illustration purposes only. Specifications are subject to change without notice. Rev. 100.
© 2021 Teledyne FLIR LLC. Approved for public release. Teledyne FLIR Approved [FLIRGTC-SBA-005]. All rights reserved.
QUICK START GUIDE: LEPTON AND
BEAGLEBONE BLACK
WARNING:
Removing power by unplugging the power cable can damage the board. Use the power
button or terminal interface to power down the board.
Steps to setup:
NOTE:
If you’re starting with a brand new BeagleBone Black: follow the steps on the Beagleboard web-
site to get started.
NOTE:
If you’re using a Mac, you can download and use Pi Filler instead of using 7-Zip
1) The Physical Setup.
a. Connect USB Hub to BeagleBone Black
b. Connect Mouse and Keyboard to Hub
c. Connect monitor to BeagleBone Black via micro HDMI cable
d. /*Setup breadboard and wiring to beaglebone*/
e. Connect 5V Power Cable to BeagleBone.
NOTE:
The board can be powered either by connecting the power cable or connecting to a computer via
the USB cable. Connecting both can cause damage to the board. For this section of the setup, we are
not connecting to a computer so only the power cable should be attached to the board and not the USB
cable.
2) Update BeagleBone Black’s packages
a. apt-get upgrade
b. apt-get update
c. apt-get install qt4-dev-tools
3) Reboot BeagleBone Black
