Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52
www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 134269 A1
Page 1
24VDC Battery Disconnect Kit
Installation Guide
Circuit disconnect switches are
optional equipment on the Telect
Seismic Indoor Battery Rack. The
24VDC Battery Disconnect Kit
modifies a rack shelf to include circuit
disconnect switches.
Each kit includes
•
two circuit breakers (1)
•
mounting brackets (5)
•
covers (3)
•
faceplate (4)
•
insulating pad (6)
•
hardware
•
cables (2 and 7) to connect the
circuit breakers to the negative
battery terminals
The circuit breakers function as disconnect switches for each battery circuit, not to protect
against power surges.
A separate kit is required for each shelf. Each shelf is two circuits of two batteries each. The
circuit breakers connect between the hot collector bus cable and the hot terminal of the second
battery in the circuit.
Please read these instructions carefully before beginning installation. If you need assistance, call
Technical Support at 1-888-821-4856 (domestic calls), or 509-921-6161 (Option 2), or email us at
[email protected].
Inspect equipment after unpacking and compare it to the packing list.
Immediately report any shipping damage, defects, or missing parts to Telect at 1-800-551-4567.
Keep all documentation that comes with your shipment.
Telect is not liable for shipping damage. If the product is damaged, notify the carrier and call
Telect’s Customer Service Department at 1-800-551-4567 (domestic only) or 1-509-926-6000 for
further recourse.
Figure 1 - Components
7
4
5
6
3
2
1
Figure 1 - Components
