Tektronix Keithley 4299-2 Dual-Unit, Installation Instructions Manual

Page: 1 / 12

Keithley Instruments
28775 Aurora Road
Cleveland, Ohio 44139
1-800-833-9200
tek.com/keithley
Model 4299-2 Dual-Unit
Rack-Mount Kit Installation Instructions
PA-909 Rev. J April 2021
*PPA-909J*
1
Introduction
The Model 4299-2 Dual-Unit Rack-Mount Kit contains the hardware required to mount two half-rack instruments
in a standard 48.3 cm (19 in.) rack. Typical installation is for two Series 2600A or 2600B System SourceMeter
®
instruments or one Series 2600A or 2600B instrument with another half-rack instrument.
Parts list
Refer to the table below for a list of parts included in the kit.
Quantity Description Keithley part number
2 Hinge 2602-328
2 Front rack-ear 2602-355
2 Rear rack-mount bracket 2602-334
2 Rack-mount extension arm 2602-335
1 Rear bracket 2304-327
1 Quick-release pin FA-352
8 Cage nut FA-274
2 #6 Lock washer 6LKWA
2 Washer WA-81
4 #8-32 × 3/8 in. Phillips pan-head screw 8-32×3/8PPH
4 #8-32 × 3/8 in. Phillips flat-head screw 8-32×3/8PFH
4 #10-32 × 3/8 in. Phillips pan-head SEMS screw 10-32×3/8PPHSEM
8 #10-32 × 5/8 in. Phillips truss-head screw 10-32×5/8PHTRSH
2 #6-32 × 5/8 in. Phillips pan-head screw 6-32×5/8PPH
2 M4 × 12 mm Phillips pan-head screw M4×12PPH
2 M4 × 12 mm Phillips flat-head screw M4×12MMPFH
Tools required

Medium (#2) Phillips screwdriver

3/8-inch wrench

Flat-bladed screwdriver or cage-nut installation tool