Astra-8131
Wireless keypad
User guide
Manufacturer:
ZAO NTC TEKO
420108, Russia, Kazan,
Gafuri str., 71
Tel.:+7(843) 528-03-69
[email protected]
www.teko.biz
Made in Russia
Rev. 8131-v1_5_instr_en
1 FUNCTION
1.1
Wireless keypad intended for operating with
controllers Security Hub, Security Hub 4G.
1.2
Intended for:
Control the CP with PIN codes, also with hot
keys “away from home”
(arming of the entire
facility),
“at home”
(arming the perimeter only)
(when working with the controller, it is necessary to
pre-register the "perimeter" button).
Sending Panic alarm signal: operating with CP
–
by pressing
and # simultaneously, operating
with Security Hub - pressing # button for more than
2
sec
;
Displaying the current state of the monitored
facility (a group of the first 16 partitions assigned to
this wireless keypad) received via radio from the
Astra-812 Pro control panel directly or through the
Astra-WE 433 radio extender or from the Security
Hub controller.
2 SPECIFICATIONS
Operating frequency, MHz:
- Frequency channel
«1» ............................. 433.42
- Frequency channel
«3» ............................. 434.42
Wireless coverage range, m ............................. 300
Supply voltage, V:
- from battery .......................................... 2.2 to 3.6
- from external power supply 12 V ............... 5 to 15
- from USB (hardware update) .............................. 5
Average battery lifetime, years ................................ 2
Overall dimensions, mm .................. 108
×113×20,5
Operating conditions
Temperature range,
°
С.................. from -10 to + 55
Relative air humidity, % ............... up to 98 at +40
°
С
without moisture condensation
3 DELIVERY SET
Delivery set includes: socket
– 1 pc., contacts – 2
pcs., mounting set (dowels
– 4 pcs., screws – 4
pcs.), battery (type
АА, 3.6 V) – 1 pc., label – 2
pcs., user guide
– 1 pc.
4 INDICATION
4.1
Keypad status
Notification
Display
Receiver
Power on (from battery)
-
+
Power
normal
(from
battery)
-
+
Power
failure
(battery
voltage lower than 2.2 V)
Icon
+
External power connect-
ed (powering from 12 V
DC power supply or USB)
Icon
+
Tampering/ Tampering
recovered
-
+
‘+’ - notification is send
‘-‘ - notification is not send
4.2 Buzzer
Notification
Buzzer
Ex-
it/Entry
delay
Turns on 1 time/sec during the en-
try/exit delay time
Alarm
On continuously for 10 minutes until
the alarm ends, or:
- until button C is pressed on the
keypad (when operating with CP),
- prior to the receipt of the com-
mand, removal or reset of alarms
(when operating with the controller)
Fire dan-
ger
Turns on 1 time in 2 sec for 0.5 sec
until pressing the "C" button on the
keypad
Fire
Turns on 1 time/sec for 0.5 sec until
pressing the "C" button on the key-
pad
Arming
Single activation for 1 sec
(when operating with a Security
Hub)
Disarm-
ing
Double activation on for 1 sec
(when operating with a Security
Hub)
Notes
1
If the message "Power failure" appears, the
battery must be replaced within two weeks.
2 At a supply voltage of 2.1 V, the keypad turns off.
